Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Ayuda

Aporte original por: Vera ,

Título:

Stripped Screw on the Logic Board

Texto:

I was trying to get the motherboard out so I can replace the thermal paste on the heat sink on the other side, and the last screw in the logic board became stripped. The screw is a 3.9mm screw. I was using a #00 Phillips head screwdrver. It is in the lower left-hand corner. I have a photo of it, but am not sure how to add it here.

What is the best method to take this out?

Dispositivo:

MacBook Pro 13" Unibody Mid 2009

Estatus:

open