Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Ayuda

Versión actual por: Dan ,

Texto:

First, I've not used a HyperJuice. In looking at the diagram I think it's clear what they do here.
 
Once you cut the cable your connecting a box at each cut end {Yellow & Blue ends} (fig1). Then you use an interconnecting cable to attach the two boxes together to power the MBP with the MagSafe charger (fig2). If you split the boxes apart you can then attach the HyperJuice battery to the charger or the system (fig3 or fig4). I suspect the interconnecting cable is part of the kit {White cable}
Once you cut the cable your connecting a box at each cut end {Yellow & Blue ends} (fig1). Then you use an interconnecting cable to attach the two boxes together to power the MBP with the MagSafe charger (fig2). If you split the boxes apart you can then attach the HyperJuice battery to the charger or the system (fig3 or fig4). I suspect the interconnecting cable is part of the kit {White cable}

Estatus:

open

Aporte original por: Dan ,

Texto:

First, I've not used a HyperJuice. In looking at the diagram I think it's clear what they do here.

Once you cut the cable your connecting a box at each cut end (fig1). Then you use an interconnecting cable to attach the two boxes together to power the MBP with the MagSafe charger (fig2). If you split the boxes apart you can then attach the HyperJuice battery to the charger or the system (fig3 or fig4).

Estatus:

open