Versión actual por: originalmachead and oldturkey03 (detalles del voto)

Título:

DC-in board from G4 to replace a broken G3 DC-in board.

Texto:

Hello!

A broken DC-in board from an ibook G3 12" 800Mhz needs replacement.

I have a spare DC-in board from an ibook G4 14".

The logic board connectors are not compatible.

Can I strip the wires to transplant the G3 board connector to the G4 Dc-in board and use it as a replacement?

I know that I still have to figure how to secure the G4 Dc-in board inside the G3 since the screws are not located in the same configuration and the "tip module" is inverted. I'm pretty sure I can figure out that one, my concern is with the voltage output to the CPU.

Will the G4 14" Dc-in board output fry the G3 12"?

Thanks!

PS: Soldering is not an option for me, yet...will learn how to soon!

Dispositivo:

iBook G3 12"

Estatus:

open

Respuesta Aceptada:

Editado por: iRobot

Título:

DC-in board from G4 to replace a broken G3 DC-in board.

Texto:

Hello!

A broken DC-in board from an ibook G3 12" 800Mhz needs replacement.

I have a spare DC-in board from an ibook G4 14".

The logic board connectors are not compatible.

Can I strip the wires to transplant the G3 board connector to the G4 Dc-in board and use it as a replacement?

I know that I still have to figure how to secure the G4 Dc-in board inside the G3 since the screws are not located in the same configuration and the "tip module" is inverted. I'm pretty sure I can figure out that one, my concern is with the voltage output to the CPU.

Will the G4 14" Dc-in board output fry the G3 12"?

Thanks!

PS: Soldering is not an option for me, yet...will learn how to soon!

Dispositivo:

Estatus:

open

Aporte original por: Ephraim

Título:

DC-in board from G4 to replace a broken G3 DC-in board.

Texto:

Hello!

A broken DC-in board from an ibook G3 12" 800Mhz needs replacement.

I have a spare DC-in board from an ibook G4 14".

The logic board connectors are not compatible.

Can I strip the wires to transplant the G3 board connector to the G4 Dc-in board and use it as a replacement?

I know that I still have to figure how to secure the G4 Dc-in board inside the G3 since the screws are not located in the same configuration and the "tip module" is inverted. I'm pretty sure I can figure out that one, my concern is with the voltage output to the CPU.

Will the G4 14" Dc-in board output fry the G3 12"?

Thanks!

PS: Soldering is not an option for me, yet...will learn how to soon!

Dispositivo:

iBook G3 12" 800Mhz

Estatus:

open