Aporte original por: bac ,
the part you need to replace is the hinge "clutch" - it should be possible to do, if you're comfortable disassembling your machine. There are 2 clutches, left and right. I've successfully replaced the hinge clutch on my previous laptop, a PowerBook G3 "Pismo". it required pretty well taking the whole unit apart - however repairing the hinges does not require you to replace the whole display. After taking apart the machine, it was clear which clutch was broken (in my case, only 1 was broken and needed replacing) I bought the replacement clutch parts from another site several years ago (before I came across ifixit.com!) - but I notice you can buy these kind of parts here on ifixit too I don't know the detailed inner construction of the Aluminum PB G4, but I think it's similar, as far as the display hinge goes. the actual replacement of the hinge parts is easy - it's the disassembling the rest of the machine to get at them that's all the work. good luck!