Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Ayuda

Versión actual por: chris ,

Título:

Replacing the LCD the new digitizer cable seems to be too short.

Texto:

[image|183142]

I'm in the process of replacing the LCD with one that I bought on ifixit.  During the reassembly (on step 15 of the guide)  the Digitizer Cable won't reach it's place on the logic board.  I've taken it back apart and started over and it still won't reach.  The Digitizer Cable comes already attached to the new LCD assembly.  Is it possible that it came too short?  Is there something that can be done.

Please help, the longer it stays torn apart the more difficult it will be to put back together.  I'm attaching two photos.

[image|183141]

Dispositivo:

iPhone 4 Verizon

Estatus:

open

Respuesta Aceptada:

100645

Editado por: chris ,

Título:

Replacing the LCD the new digitizer cable seems to be too short.

Texto:

[image|183142]
 
I'm in the process of replacing the LCD with one that I bought on ifixit. During the reassembly (on step 15 of the guide) the Digitizer Cable won't reach it's place on the logic board. I've taken it back apart and started over and it still won't reach. The Digitizer Cable comes already attached to the new LCD assembly. Is it possible that it came too short? Is there something that can be done.
 
Please help, the longer it stays torn apart the more difficult it will be to put back together. I'm attaching two photos.
 
[image|183141]

Dispositivo:

iPhone 4 Verizon

Estatus:

open

Editado por: chris ,

Título:

Replacing the LCD the new digitizer cable seems to be too short.

Texto:

I'm in the process of replacing the LCD with one that I bought on ifixit.  During the reassembly (on step 15 of the guide)  the Digitizer Cable won't reach it's place on the logic board.  I've taken it back apart and started over and it still won't reach.  The Digitizer Cable comes already attached to the new LCD assembly.  Is it possible that it came too short?  Is there something that can be done.

Please help, the longer it stays torn apart the more difficult it will be to put back together.  I'm attaching two photos.

Dispositivo:

iPhone 4 Verizon

Estatus:

open

Aporte original por: chris ,

Título:

Replacing the LCD the new digitizer cable seems to be too short.

Texto:

I'm in the process of replacing the LCD with one that I bought on ifixit.  During the reassembly (on step 15 of the guide)  the Digitizer Cable won't reach it's place on the logic board.  I've taken it back apart and started over and it still won't reach.  The Digitizer Cable comes already attached to the new LCD assembly.  Is it possible that it came too short?  Is there something that can be done.

Please help, the longer it stays torn apart the more difficult it will be to put back together.  I'm attaching two photos.

Dispositivo:

iPhone 4 Verizon

Estatus:

open