iFixit - Answers With Device "Third Party Nintendo Switch Controller"

8BitDo SN30 Pro Controller: Mi mando si vincula por bluethooh pero no funciona los botones.

Fri, 18 Apr 2025 11:08:12 -0700

Quiero vincular mi mando con mi ipad de 9na generacion , si se vincula por bluethooh pero no funciona ningun botom ,necesito una ayuda porfavor

⟐ Commented abril 18, 2025 at 11:08 GMT-7

GameSir Cyclone 2: Mi control alambrico al conectarlo a la consola prende y no reacciona

Wed, 09 Sep 2026 07:40:51 -0700

Al conectar el control a la consola el botón principal de encendido del control prende pero los demas botones no reaccionan a nada. Los apretó todos los botones y no pasa nada. Y tampoco el botón principal del control.

⟐ Answered septiembre 09, 2026 at 7:40 GMT-7

GameSir Turantula Pro: No funcionan los gatillos

Tue, 23 Jun 2026 18:12:53 -0700

Cuando estoy jugando y dejó presionado el gatillo izquierdo, así como los botones x, b aparece un error que hace que lo detecte como si lo presionará repetidamente de manera rápida.

⟐ Answered junio 23, 2026 at 18:12 GMT-7

GameSir T4 Pro: Los botones "m" de mi control estan vueltos locos

Wed, 06 Mar 2024 12:34:47 -0700

no se que ocurre, acabo de comprar este control hace pocas semanas, lo unico que supongo es que haya venido fallado de fabrico o se haya sulfatado pero... que tan probable es? solo estuvo expuesto a humedad ambiental, no se me cayo al agua ni nada., a que se debe y como puedo solucionarlo?

⟐ Answered marzo 06, 2024 at 12:34 GMT-7

GameSir T4 Pro: ¿Que potenciómetro joystick sería el reemplazo?

Mon, 15 May 2023 15:33:29 -0700

¿Que "potenciómetro joystick" sería el reemplazo del que tiene por defecto el mando gamesir T4 Pro y como se realiza el cambio?

⟐ Answered mayo 15, 2023 at 15:33 GMT-7

GuliKit KingKong 2 Pro: Se desconecta al conectar unos minutos

Sat, 03 Jan 2026 08:51:00 -0700

Mi mando al estar jugando y al sincronizar al paso de unos minutos se desconecta

GameSir T4 Pro: no prende luz del adaptador Bluetooth que se conecta al PC

Thu, 22 Aug 2024 06:33:48 -0700

Estimados,

favor su ayuda ya que hace poco compre el GameSir T4 Pro y lamentablemente no se conecta el joystick de manera inalámbrica ya que me fije que el adaptador que se conecta en PC no enciende su luz, probe en todos los USB de mi pc y tambien en im nintendo switch no lamentablemente no conecta el joystick.

espero que me puedan ayudar ya que el joystick se ve muy bueno.

Saludos.

GuliKit KingKong 2 Pro: ¿por qué mi gatillo izquierdo falla?

Sat, 09 Dec 2023 06:16:50 -0700

El gatillo izquierdo está fallado cuando juego fornite quedándose presionado el comando apuntar y haciéndome imposible jugar con normalidad.

¿Cómo puedo solucionar este problema?

¿Tendría que cambiar los gatillos por unos nuevos o es más complicado?

GameSir T4 Pro: Mis 4 gatillos no funcionan

Wed, 24 May 2023 04:51:56 -0700

Me gustaría saber si existe solución porque los 4 gatillos no responden

Hori Split Pad Pro: My right controller is having problems

Wed, 01 Jan 2025 12:29:18 -0700

When I have my split pad pro it stops functioning mid game and it goes from running smoothly to the right one not responding and when I check the controller settings it shows the right one is not connected and I know it’s not my switch because the joy con works perfectly when connected. So in conclusion my right hori split pad pro is not connecting to my switch

⟐ Answered enero 01, 2025 at 12:29 GMT-7

PowerA Enhanced Wireless Controller: My left stick is screwing up, and I want to replace it.

Sat, 18 Jan 2025 17:59:20 -0700

basically, when i input straight left, the controller decides it wants to alternate between upper left and downer left really fast. which is not good for games like smash bros or celeste. what should i get to replace it?

⟐ Commented enero 18, 2025 at 17:59 GMT-7

Hori Split Pad Pro: Is it possible to repair the zr trigger button on hori split pad?

Wed, 01 Jan 2025 12:43:21 -0700

I bought two of these hori split pad pro controllers. I mainly use them to play smash bros ultimate. Both of them the zr trigger button got pretty mushy after 5 months and will not register an input when I press it. Is there any way to fix just that button?

⟐ Answered enero 01, 2025 at 12:43 GMT-7

Hori Split Pad Pro: Random drift on left controller

Wed, 01 Jan 2025 12:17:10 -0700

On my left hand controller it is just steering left and it was so random in just started happening if there is a way to reset it or something that would be nice thank you.

⟐ Answered enero 01, 2025 at 12:17 GMT-7

PowerA Enhanced Wireless Controller: Where can I get some replacement pads for the ABXY buttons?

Fri, 08 Jan 2021 07:11:49 -0700

After a whole year of much love and attention, my A button doesn't click like the other buttons and doesn't stand as tall. I'm worried it'll be non-responsive before long. I tried contacting PowerA but got nowhere. Where can I buy replacement parts without paying for a whole new controller?

⟐ Answered enero 08, 2021 at 7:11 GMT-7

8BitDo SN30 Pro Controller: SN 30 Pro+ replacement parts

Wed, 02 Sep 2026 20:26:45 -0700

What is the form factor used for the analog sticks? Is it proprietary?

⟐ Answer accepted septiembre 02, 2026 at 20:26 GMT-7

Hori Split Pad Pro: Is there anything inside the feet that would break being cut off?

Wed, 01 Jan 2025 12:57:22 -0700

Long story short, I love these controllers - but the feet do not feet with the case on the body of the Switch, which I need. Wondering if they can removed without much worry.

Long story short - I want to cut off the two feet on the back so I can still use these controllers.

⟐ Answered enero 01, 2025 at 12:57 GMT-7

GuliKit KingKong 2 Pro: Flashing Lights when woken up shuts down after 10 seconds

Mon, 22 Jan 2024 10:50:41 -0700

When i wake up the controller it just flash LEDs for 10 seconds and it turns off.

PS: I charged it for more than two hours. and its brand new

⟐ Commented enero 22, 2024 at 10:50 GMT-7

PowerA GameCube Style Wireless Controller: How do I fix upward drift in the left joystick?

Mon, 23 Oct 2023 16:28:35 -0700

The left joystick will randomly drift up, sometimes a lot and sometimes a little, but nevertheless it is really annoying when I'm playing Smash Ultimate and I try to do my neutral B attack but instead it does the up B due to the drifting. How can I fix this issue? (Also this is a wired controller, I could only find the wireless one on here.)

⟐ Commented octubre 23, 2023 at 16:28 GMT-7

8BitDo SN30 Pro Controller: How can I disconnect this cable from my sn30 pro wired xbox edition?

Wed, 14 Jun 2023 14:44:44 -0700

hello everyone, i'm trying to fix a strange error with my controller that makes it disconnect when the cable is in a specific position, and i would like advice on how to fix or how to disconnect the cable.

⟐ Answered junio 14, 2023 at 14:44 GMT-7

8BitDo SN30 Pro Gamepad: ¿on which page could you buy sn30 pro silicone rubber?

Wed, 19 Jan 2022 18:44:11 -0700

buttons A, X, B, Y, R, R2 remain pressed

⟐ Answered enero 19, 2022 at 18:44 GMT-7