<![CDATA[iFixit - Active Questions With Device "Sewing Machine"]]> https://es.ifixit.com/Respuestas/Device/Sewing_Machine/All?rss=yes en-US Sat, 09 May 2026 23:28:23 -0700 <![CDATA[Singer Brilliance 6180: Como regular o ponto?]]> Como regular o ponto?

]]> https://es.ifixit.com/Respuestas/Ver/951944/Como+regular+o+ponto https://es.ifixit.com/Respuestas/View/951944 Sat, 25 Apr 2026 04:25:36 -0700 <![CDATA[Baby Lock Ellegante 2: Porque el pedal de mi máquina no jala al 100?]]> Porque el pedal de mi máquina no jala al 100

⟐ Answered abril 01, 2026 at 8:12 GMT-7

]]> https://es.ifixit.com/Respuestas/Ver/948042/Porque+el+pedal+de+mi+m%C3%A1quina+no+jala+al+100 https://es.ifixit.com/Respuestas/View/948042 Wed, 01 Apr 2026 08:12:55 -0700 <![CDATA[Sewing Machine: Por qué enreda el hilo la máquina de coser]]> Se hace nudo en la parte de abajo

]]> https://es.ifixit.com/Respuestas/Ver/937707/Por+qu%C3%A9+enreda+el+hilo+la+m%C3%A1quina+de+coser https://es.ifixit.com/Respuestas/View/937707 Sun, 25 Jan 2026 13:09:25 -0700 <![CDATA[Brother Compal Star: ¿por que no realiza las puntadas adecuadas al coser?]]> Al coser una tela saltea y no cose

⟐ Answer edited noviembre 29, 2025 at 18:58 GMT-7

]]> https://es.ifixit.com/Respuestas/Ver/835393/%C2%BFpor+que+no+realiza+las+puntadas+adecuadas+al+coser https://es.ifixit.com/Respuestas/View/835393 Sat, 29 Nov 2025 18:58:50 -0700 <![CDATA[Sewing Machine: porque mi maquina de coser no avanza mientras cose?]]> mi maquina brother LX cose pero se queda detenida la tela no avanza no camina

⟐ Commented noviembre 29, 2025 at 18:49 GMT-7

]]> https://es.ifixit.com/Respuestas/Ver/838822/porque+mi+maquina+de+coser+no+avanza+mientras+cose https://es.ifixit.com/Respuestas/View/838822 Sat, 29 Nov 2025 18:49:53 -0700 <![CDATA[Antique Singer sewing machine 1935: Mi máquina es modelo 614 - A y es muy difícil encontrar algo sobre de]]> Casi no se de máquinas la mandé arreglar y me la dejaron pero ahora no cose hacia muchas puntadas diferentes ahora solo hace recta y zig zag pero no cose

]]> https://es.ifixit.com/Respuestas/Ver/911968/Mi+m%C3%A1quina+es+modelo+614+-+A+y+es+muy+dif%C3%ADcil+encontrar+algo+sobre+de https://es.ifixit.com/Respuestas/View/911968 Thu, 14 Aug 2025 10:25:45 -0700 <![CDATA[Singer M1500 Sewing Machine: Porque la máquina no cambia de puntada]]> La máquina siempre tiene la misma puntada aunque se cambia la puntada con el marcador de puntada y es la más chica. Y muy apretada

]]> https://es.ifixit.com/Respuestas/Ver/884024/Porque+la+m%C3%A1quina+no+cambia+de+puntada https://es.ifixit.com/Respuestas/View/884024 Wed, 15 Jan 2025 16:30:00 -0700 <![CDATA[Kenmore Sewing Machine: Mi máquina trabaja sola al conectarla al suministro de luz]]> Por qué mi máquina de cocer trabaja sola con solo conectarla a la corriente eléctrica?

⟐ Answered agosto 23, 2024 at 7:40 GMT-7

]]> https://es.ifixit.com/Respuestas/Ver/866028/Mi+m%C3%A1quina+trabaja+sola+al+conectarla+al+suministro+de+luz https://es.ifixit.com/Respuestas/View/866028 Fri, 23 Aug 2024 07:40:32 -0700 <![CDATA[Singer M1500 Sewing Machine: Why does the machine get stuck?]]> When i try to use it the needle gets stuck inside the bobbin case. The bobbin case doesn’t work and is stuck

⟐ Answered mayo 08, 2026 at 21:14 GMT-7

]]> https://es.ifixit.com/Respuestas/Ver/930346/Why+does+the+machine+get+stuck https://es.ifixit.com/Respuestas/View/930346 Fri, 08 May 2026 21:14:22 -0700 <![CDATA[Singer M1500 Sewing Machine: Why is the needle part off the sewing machine too free too hold on the]]> Why does the sewing machine needle part don't hold clothes why sewing a cloth on the machine

⟐ Commented abril 29, 2026 at 11:08 GMT-7

]]> https://es.ifixit.com/Respuestas/Ver/952661/Why+is+the+needle+part+off+the+sewing+machine+too+free+too+hold+on+the https://es.ifixit.com/Respuestas/View/952661 Wed, 29 Apr 2026 11:08:23 -0700 <![CDATA[Sewing Machine: Why is it only working in low gear?]]> My sea punk tiny sewing machine only works in low gear. Sounds jammed and stuck when I put it in high gear. Help?

]]> https://es.ifixit.com/Respuestas/Ver/951189/Why+is+it+only+working+in+low+gear https://es.ifixit.com/Respuestas/View/951189 Sun, 19 Apr 2026 20:29:10 -0700 <![CDATA[Sewing Machine: Sewing machine jams only when shuttle/bobbin case is installed]]> My sewing machine jams as soon as I install the shuttle/bobbin case. The top rod (take-up lever) stops moving entirely when the shuttle is in place, but the machine runs smoothly when the shuttle is removed. I have cleaned out the lint and checked for basic jams, but the issue persists. Is this a shuttle timing issue or an alignment problem with the shuttle race? It is an Indian-style machine (similar to Usha/Singer manual models). Any advice on how to align the hook or reset the timing would be appreciated.

]]> https://es.ifixit.com/Respuestas/Ver/951137/Sewing+machine+jams+only+when+shuttle-bobbin+case+is+installed https://es.ifixit.com/Respuestas/View/951137 Sun, 19 Apr 2026 10:33:51 -0700 <![CDATA[Brother CE8080: uten 200 sewing machine runs as soon as I switch it on]]> I have uten 200 sewing machine, it runs as soon as I switch it on while not pressing the pedal or button to move it , the light also blinks at interval while running, cannot sew or control it once it's on can you help please?

⟐ Commented abril 18, 2026 at 7:37 GMT-7

]]> https://es.ifixit.com/Respuestas/Ver/950943/uten+200+sewing+machine+runs+as+soon+as+I+switch+it+on https://es.ifixit.com/Respuestas/View/950943 Sat, 18 Apr 2026 07:37:41 -0700 <![CDATA[Sewing Machine: Smoke from the engine]]> Bernina Bernette 330 from the eighties, apparently in good shape.

Turning the wheel, the needle moved. I turned the engine on, light went on but the needle didn't move. After a couple of minutes, a buzzing noise and a whisp of white smoke. It smells like paper smoke. Is there something I can do?

]]> https://es.ifixit.com/Respuestas/Ver/947873/Smoke+from+the+engine https://es.ifixit.com/Respuestas/View/947873 Tue, 31 Mar 2026 14:17:48 -0700 <![CDATA[Janome 3160QDC: The up and down mechanism is jammed]]> The mechanism that makes the needle go up and down is jammed, it doesn’t go up and when I try to continue sewing the screen shows Lo.

Any idea why this could happen?

⟐ Answer edited marzo 19, 2026 at 7:29 GMT-7

]]> https://es.ifixit.com/Respuestas/Ver/945613/The+up+and+down+mechanism+is+jammed https://es.ifixit.com/Respuestas/View/945613 Thu, 19 Mar 2026 07:29:32 -0700 <![CDATA[Janome 3160QDC: “As soon as I start using my Usha Janome machine, the thread gets tang]]> “As soon as I start using my Usha Janome machine, the thread gets tangled on the fabric and the stitching doesn’t happen. I have to cut the thread again and again.”

⟐ Answered marzo 18, 2026 at 3:55 GMT-7

]]> https://es.ifixit.com/Respuestas/Ver/934436/%E2%80%9CAs+soon+as+I+start+using+my+Usha+Janome+machine,+the+thread+gets+tang https://es.ifixit.com/Respuestas/View/934436 Wed, 18 Mar 2026 03:55:52 -0700 <![CDATA[Bernina 730 Record: How to fix bernina 730 record timing]]> Timing gone wrong. How can i get it back?

⟐ Answered febrero 24, 2026 at 21:52 GMT-7

]]> https://es.ifixit.com/Respuestas/Ver/942095/How+to+fix+bernina+730+record+timing https://es.ifixit.com/Respuestas/View/942095 Tue, 24 Feb 2026 21:52:40 -0700 <![CDATA[Sewing Machine: machine starts beeping after two stitches]]> My Singer 2638 machine stitches a couple of times and then beeps and then stops. The handle is really hard to turn. I have opened it all up, cleaned out everything but not sure what gear might be bad? Or where to look?

]]> https://es.ifixit.com/Respuestas/Ver/940476/machine+starts+beeping+after+two+stitches https://es.ifixit.com/Respuestas/View/940476 Thu, 12 Feb 2026 17:33:41 -0700 <![CDATA[Sewing Machine: Stuck bobbin, unable to remove]]> I have a Bernina 560, the bobbin and case is stuck in the machine. There is no lever on the right of the bobbin to quickly disassemble the bobbin closure. I have removed the top silver plate and tried different wheel positions. It’s stuck.

⟐ Edited febrero 08, 2026 at 1:31 GMT-7

]]> https://es.ifixit.com/Respuestas/Ver/939710/Stuck+bobbin,+unable+to+remove https://es.ifixit.com/Respuestas/View/939710 Sun, 08 Feb 2026 01:31:25 -0700 <![CDATA[Kenmore Series 158: Why is the sewing art not going up and down but the belt still turns]]> The motor runs the belt turns but the sewing part won’t go up and down

]]> https://es.ifixit.com/Respuestas/Ver/939569/Why+is+the+sewing+art+not+going+up+and+down+but+the+belt+still+turns https://es.ifixit.com/Respuestas/View/939569 Fri, 06 Feb 2026 10:35:06 -0700