iFixit - Answers With Device "Planer"

Ridgid Thickness Planer R4331 2011: Cómo puedo desmontar el cuerpo de el motor para reparar el colector y

Fri, 06 Mar 2026 23:20:27 -0700

Cómo retiro el motor para darle mantenimiento

Makita Planer KP0800 2009: Perilla ajuste de profundidad se afloja

Mon, 21 Jul 2025 01:59:32 -0700

Hola, una consulta técnica, tengo un cepillo de mano eléctrico makita KP0800. El problema que tengo es que fijo un espesor para trabajar y cuando acciono el cepillo la rueda de selección de profundidad se va girando y va cambiando la profundidad. Si la mantengo agarrada todo va bien. Alguien sabe que puede ser??

La perilla de ajuste de profundidad de cepillado con el uso y la vibración se va desajustando y termina dejando en 0 el espesor de cepillado.

Intente desarmar la perilla para sacar el patin y ver que onda ahi dentro, pero no se pudo , la perilla afloja bastante, el patin queda mas suelto hasta que llaga un momento en que vuelve a endurecer y ahi el patin queda bien estable, no quise forzarla por las dudas que se dañe algo.
Alguien sabe como se puede ajustar o arreglar.??

⟐ Commented julio 21, 2025 at 1:59 GMT-7

Ridgid R4300 Planer: Seguro de cabezal de corte atascado

Wed, 26 Feb 2025 13:29:46 -0700

Tras haber apretado todos los tornillos de las cuchillas, el seguro de bloqueo no se libera solo. El cabezal de cuchillas sigue inmóvil

Dewalt Planer DW733 TYPE 1 2012: La cepilladora no tiene fuerza

Wed, 29 Jan 2025 18:44:03 -0700

Al introducir la madera los rotores de goma no tienen fuerza para dirigir hacia adentro ni para expulsar posteriormente

Delta Planer 22540 TYPE 1 2015: 22-540 delta planer table extentions

Sun, 18 Jan 2026 13:25:01 -0700

Where can I find the table extentions for this planer? I inherited without them.

Dewalt Planer DW734 TYPE 1 2012: How tight should I take roller brackets be

Wed, 18 Mar 2020 13:27:38 -0700

Do the brackets that hold the intake rollers in place get tightened down to frame or should there be some play. There are springs beneath the bearing holding the rollers for some reason

Dewalt Planer DW733 TYPE 1 2012: Motor tripping fuse when switched on

Sat, 08 Nov 2025 12:10:22 -0700

Any idea what would cause the machine to trip the breaker in fuse box when switched on

⟐ Answered noviembre 08, 2025 at 12:10 GMT-7

Bosch Planer 1594K 2016: Sawdust does not exit to the dust bin

Wed, 30 Oct 2024 19:52:49 -0700

All of a,sudden the dust no longer exits into the dust bin. Rather, it goes out the bottom of the planer

⟐ Answer edited octubre 30, 2024 at 19:52 GMT-7

Ridgid R4300 Planer: Why are my blades not turning?

Sun, 30 Jul 2023 09:12:04 -0700

why are my blades not turning?

⟐ Commented julio 30, 2023 at 9:12 GMT-7

Bosch Planer 1594K 2016: belt broke on older planer

Wed, 25 Mar 2026 05:53:48 -0700

how do i change the internal belt?

Ridgid Thickness Planer R4331 2011: What do I have to remove to get to the circuit breaker?

Wed, 11 Mar 2026 23:06:14 -0700

I just need to know what I have to remove to get to the rest switch and circuit breaker

Ridgid R4300 Planer: rattling noise from inside when I switch on.

Wed, 04 Mar 2026 14:50:20 -0700

When I turn switch on to use planer there is a rattling noise like something is loose coming from inside. I removed the vacuum port and cover but didn't see anything loose. Was going to remove the switch cover to look inside there so I removed the top screw of the cover and need to know where the bottom screws are because the switch comes out at the top but is hung up at the bottom. Didn't want to try to much because I don't was to damage it. The planer works great and cuts really well just don't want to keep using it in case something got inside of it. I purchased this unit used.

Ridgid Thickness Planer R4331 2011: breaker blow 3 seconds after turning on

Thu, 13 Nov 2025 16:42:50 -0700

blows circuit breaker 3-4 seconds after turning on why

Ryobi Planer AP10 2011: Hesitation during feed through

Thu, 30 Oct 2025 14:38:07 -0700

Why does my planer hesitate through the feed and makes a thumping sound?

Ryobi Planer AP10 2011: My planner quite feeding.

Wed, 13 Aug 2025 13:18:57 -0700

I am planning down 9 pieces of mesquite using my father's planner (I have never used one before) for an urn for his ashes. I started at about 3 inches and I am down to almost 3/4 inch with a goal of 1/2 inch. I changed the blades a couple of days ago and everything was working well until today when it quite feeding. What should I address first with the feeding issue?

Makita Planer KP0800 2009: Why is my KP0800 making noise?

Sat, 07 Jun 2025 03:10:30 -0700

My KP0800 is making a screeching whirl sound after I release the trigger. Some friends tell me it is the bearings. Can someone provide some help.

⟐ Commented junio 07, 2025 at 3:10 GMT-7

Ridgid R4300 Planer: Why my planer wont raise for a thicker piece

Sun, 11 Mar 2018 17:03:24 -0700

My Rigid planer spent the winter under my shop lean to. When starting it up this spring, the motor will run but the thickness adjustment will not move. I took the sides and bottom off and the chain was slack and had play. The adjustment rods would not turn when I tried to turn them with my fingers.