Partes

No se requieren partes.

Unplug all the cables from the computer, including the power cable. Lay the computer face-down, supporting the neck and base with a soft cloth under the screen.
  • Unplug all the cables from the computer, including the power cable. Lay the computer face-down, supporting the neck and base with a soft cloth under the screen.

Agregar Comentario

Loosen the four Phillips #0 screws.
  • Loosen the four Phillips #0 screws.

Agregar Comentario

Carefully remove the base access panel.
  • Carefully remove the base access panel.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Remove the four 25mm T-15 screws. Remove the four 25mm T-15 screws.
  • Remove the four 25mm T-15 screws.

Agregar Comentario

Open the housing plate. Be gentle with the wires still connected to the logic board  so as not to ruin the cables.
  • Open the housing plate.

  • Be gentle with the wires still connected to the logic board so as not to ruin the cables.

  • A fixed plug connector between the logic board and upper unit will cause some resistance. Pull gently but firmly.

Agregar Comentario

Remove the 2 torx 10mm screws on the EMI shield Carefully remove shield and copper tape Carefully remove shield and copper tape
  • Remove the 2 torx 10mm screws on the EMI shield

  • Carefully remove shield and copper tape

Agregar Comentario

Remove the 4 10mm torx screws attatched to the drive carrier. The drive carrier includes optical drive and hard drive.
  • Remove the 4 10mm torx screws attatched to the drive carrier.

  • The drive carrier includes optical drive and hard drive.

Agregar Comentario

Grasp the carrier with both hands on each side.
  • Grasp the carrier with both hands on each side.

  • Remove the carrier by lifting up and out.

  • Pull gently but firmly. The carrier is meant to fit snugly.

Agregar Comentario

Flip the removed carrier to the right and pull out power cables.
  • Flip the removed carrier to the right and pull out power cables.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Courtney

Miembro Desde 06/10/11

734 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 21-22, Maness Fall 2011 Miembro de Cal Poly, Team 21-22, Maness Fall 2011

CPSU-MANESS-F11S21G22

4 Miembros

13 Guías creadas

What two screws in step 6

David Hunter - Contestar

We need a "action" shot; we need to show an actual screwdriver unscrewing the screw.

David Hunter - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 4

Últimos 30 Días: 9

Todo El Tiempo: 1,697