Repara tus cosas Comunidad Tienda

iMac G4 17 800 MHz EMC 1936 Battery Replacement

Introducción

Pre-Installed MacOS 9.2.2 & X 10.1.2

Maximum MacOS X 10.4.11

This model is capable of booting in MacOS 9 and using MacOS 9 applications within the MacOS X "Classic" environment.

Standard RAM 256 MB Maximum RAM: 1.0 GB

RAM Type PC133 SDRAM Min. RAM Speed 10 ns

Details: Although Apple's original specifications stated that it shipped with PC100 RAM, Apple later warned that "PC100 RAM is not to be used with iMac (Flat Panel) computers and may create performance and reliability issues".

*There is one factory installed memory module in a 168-pin DIMM slot and one 144-pin user-accessible SO-DIMM slot.

  • Standard Hard Drive 60 GB (5400 RPM) Int. HD Interface Ultra ATA/66

Standard Optical 2X "SuperDrive" Standard Disk: None

Details: Apple reports that the tray-loading DVD-R/CD-RW SuperDrive "writes DVD-R discs at 2x speed, reads DVDs at 6x speed, writes CD-R discs at 8x speed, writes CD-RW discs at 4x speed, and reads CDs at 24x speed."

Also see: What are the capabilities of the optical drive provided by the iMac G4 models? How do you replace or upgrade the optical drive?

Standard Modem 56k v.90 Standard Ethernet 10/100Base-T

Standard AirPort 802.11b (Optional) Standard Bluetooth None

USB Ports 3 (1.1) Firewire Ports: 2 (400)

Standard AirPort: 802.11b (Optional) Standard Bluetooth: None

PRAM battery 3.6V half-AA

Qué necesitas

  1. iMac G4 17 800 MHz EMC 1936 Battery Replacement, Battery: paso 1, imagen 1 de 3 iMac G4 17 800 MHz EMC 1936 Battery Replacement, Battery: paso 1, imagen 2 de 3 iMac G4 17 800 MHz EMC 1936 Battery Replacement, Battery: paso 1, imagen 3 de 3

    • G4 bottom Plate with four captive Phillips screws

    • The bottom of the plate will list the serial number, MHz of the machine, standard RAM and hard drive size

    Traducir

  2. iMac G4 17 800 MHz EMC 1936 Battery Replacement: paso 2, imagen 1 de 1

    • Here the plate has been removed exposing the slot for the Airport Card and User added RAM slot.

    Traducir

  4. iMac G4 17 800 MHz EMC 1936 Battery Replacement: paso 3, imagen 1 de 2 iMac G4 17 800 MHz EMC 1936 Battery Replacement: paso 3, imagen 2 de 2

    • Remove the four T15 torx screws.

    • Set the unit on it's base, grasp the neck and tilt it to separate the base.

    Traducir

  5. iMac G4 17 800 MHz EMC 1936 Battery Replacement: paso 4, imagen 1 de 2 iMac G4 17 800 MHz EMC 1936 Battery Replacement: paso 4, imagen 2 de 2

    • The IDE cable unplugs first.

    • Locate the 3.6 volt 1/2 AA Lithium PRAM battery on the logic board and replace it.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

10 personas más completaron esta guía.

Autor

con 4 otros colaboradores

mayer

Miembro Desde 01/04/10

685,280 Reputación

12 Guías creadas

Insignias: 49

+ 46 más insignias

Equipo

MacHale Enterprises Miembro de MacHale Enterprises

Business

1 Miembro

18 Guías creadas

2 comentarios

These directions do not explain how to do any step of the process particularly showing where the battery is and how to carefully remove the bottom plate without breaking the logic board connector or cables. Also they are redundant as there are already directions to replace the PRAM Battery on this site. There is no point in there being two sets of directions for the same fix.

Sheldon Buchler - Contestar

Sad that none of the pictures actually show the battery! Look for the other iMac G4 battery guide its better, although it misses the step of recoating the heat sinks with thermal paste.

Netmammal - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 4

Ultimos 30 días: 29

Todo El Tiempo: 15,255