Introducción
Is a smattering of dead pixels totally harshing your videos' mellow? Replace that bad image sensor with a new one and get all of your resolution back.
Qué necesitas
-
-
Hold the iON in your hands with your thumbs on the clips next to the middle of the lens.
-
Pull the rubber housing apart to release the first two clips.
-
-
-
Remove the four 7.1 mm Phillips screws securing the camera housing to the goggle frame.
-
-
-
-
Remove the following four screws securing the back cover of the camera housing:
-
two silver 8.5 mm screws,
-
two black 8.8 mm screws.
-
-
-
Remove the two 9.3 mm screws securing the camera sensor board to the camera lens housing.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.