Introducción

Wire needs to be exposed from its insulation in order before it can be soldered to another wire. Wire stripping exposes the wire so you are able to make good connections.

Partes

No se requieren partes.

Match your gauge of wire to the gauge on a wire stripper.
  • Match your gauge of wire to the gauge on a wire stripper.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Place the wire stripper about a 1/4” from the end of the wire and squeeze down.
  • Place the wire stripper about a 1/4” from the end of the wire and squeeze down.

Agregar Comentario

While squeezing, pull the stripper along the end of the wire. This should expose some of the wire by removing its insulation.
  • While squeezing, pull the stripper along the end of the wire. This should expose some of the wire by removing its insulation.

Agregar Comentario

Conclusión

After your wire has been stripped, the exposed wire is ready to be soldered and reconnected to other parts of the microphone.

Una persona más ha completado esta guía.

nat coll

Miembro Desde 27/09/12

366 Reputación

17 Guías creadas

Equipo

Cal Poly, Team 7-53, Forte Fall 2012 Miembro de Cal Poly, Team 7-53, Forte Fall 2012

CPSU-FORTE-F12S7G53

5 Miembros

18 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 7

Últimos 30 Días: 19

Todo El Tiempo: 2,149