Venturer CR20 Power Cord Replacement

Introducción

In this guide, you will learn how to remove and install the power cord of your alarm clock. The process consists of removing the front screen, followed by taking the hardware out of the housing and detaching the power cord.

Qué necesitas

Paso 1 Front Screen

Venturer CR20 Power Cord Replacement, Front Screen: paso 1, imagen 1 de 1

On the bottom of the clock locate and unscrew the single 2mm Phillips screw from bottom of the clock.

Traducir

Paso 2

Using a moderate amount of force, position the screwdriver in the crack between the front screen and the main body of the clock (as shown) and push the screen away from the main body of the clock.

Traducir

Paso 3 Power Cord

Venturer CR20 Power Cord Replacement, Power Cord: paso 3, imagen 1 de 2

Venturer CR20 Power Cord Replacement, Power Cord: paso 3, imagen 2 de 2

Get a firm grip on the outside of the clock and a firm grip on the hardware on the inside of the the clock like so and pull the hardware out from the outside of the clock.

Traducir