Unscrew the three screws from the back panel with Phillips #0 screwdriver.
  • Unscrew the three screws from the back panel with Phillips #0 screwdriver.

  • Remove the back panel.

Agregar Comentario

Locate the two clips holding the RAM chip in place. Apply pressure to each clip, pulling them away from the RAM. One end of the RAM will pop out.
  • Locate the two clips holding the RAM chip in place.

  • Apply pressure to each clip, pulling them away from the RAM.

  • One end of the RAM will pop out.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Gently pull RAM out as shown. Gently pull RAM out as shown.
  • Gently pull RAM out as shown.

Agregar Comentario

To intall a new stick of RAM, carefully insert it into into the RAM slot.
  • To intall a new stick of RAM, carefully insert it into into the RAM slot.

  • Gently push down on the RAM chip until it snaps securely into place.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 4-3, Regan Spring 2011 Miembro de Cal Poly, Team 4-3, Regan Spring 2011

CPSU-REGAN-S11S4G3

5 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 1

Últimos 30 Días: 2

Todo El Tiempo: 2,535