Introducción

Use this guide to replace or install a wireless card in your Toshiba laptop.

Power off the laptop.
  • Power off the laptop.

  • Disconnect the power cable from the laptop. If you do not, electric shock may result.

Agregar Comentario

Flip the laptop over and orient it such that the battery faces towards you and the front faces away from you as shown in the diagram.
  • Flip the laptop over and orient it such that the battery faces towards you and the front faces away from you as shown in the diagram.

  • Unlock the battery by sliding the tab shown to the right.

    • This tab will latch into place.

Agregar Comentario

Slide the tab shown to the left and remain holding it.
  • Slide the tab shown to the left and remain holding it.

    • This tab does not lock into place like in the first step.

  • Place your thumb on the grips of the battery as shown.

    • While holding onto the grips, pull the battery towards you and away from the laptop.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Loosen this 5 mm Phillips #0 screw found in the center of the lower case. Use the Phillips #0 screwdriver. The screw will not come out completely, it will stay connected to the center plate.
  • Loosen this 5 mm Phillips #0 screw found in the center of the lower case. Use the Phillips #0 screwdriver.

    • The screw will not come out completely, it will stay connected to the center plate.

Agregar Comentario

Remove the center plate by lifting it and sliding it to the right.
  • Remove the center plate by lifting it and sliding it to the right.

  • If the back panel is difficult to remove and feels like it is going to break, DO NOT force it. Check to confirm that the screw is loose before attempting again.

Agregar Comentario

The computer should be open with many of the internal components shown. You can now access the RAM, and wireless card.
  • The computer should be open with many of the internal components shown. You can now access the RAM, and wireless card.

Agregar Comentario

Pull the white auxiliary wire out of its socket. Repeat with the black auxiliary wire.
  • Pull the white auxiliary wire out of its socket.

  • Repeat with the black auxiliary wire.

Agregar Comentario

Push the two black tabs away from the card. The right side of the wireless card should pop out of its holder. Pull the wireless card out by lifting it from the dock and sliding it towards the right.
  • Push the two black tabs away from the card. The right side of the wireless card should pop out of its holder.

    • Pull the wireless card out by lifting it from the dock and sliding it towards the right.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Travis

Miembro Desde 13/04/13

13 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 10-38, Amido Spring 2013 Miembro de Cal Poly, Team 10-38, Amido Spring 2013

CPSU-AMIDO-S13S10G38

4 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 5

Todo El Tiempo: 452