Partes

No se requieren partes.

Use the plastic opening tool to lift up the top panel all the way along the keyboard until it loosens. It may be helpful to first pry at the rear of the hinge covers (not shown) to release them. Then Insert the plastic opening tool underneath the top panel's sides and then front edge. It may be helpful to first pry at the rear of the hinge covers (not shown) to release them. Then Insert the plastic opening tool underneath the top panel's sides and then front edge.
  • Use the plastic opening tool to lift up the top panel all the way along the keyboard until it loosens.

  • It may be helpful to first pry at the rear of the hinge covers (not shown) to release them. Then Insert the plastic opening tool underneath the top panel's sides and then front edge.

Agregar Comentario

Remove the top panel by popping the panel out the top left socket, then do the same with the right side. Remove the top panel by popping the panel out the top left socket, then do the same with the right side.
  • Remove the top panel by popping the panel out the top left socket, then do the same with the right side.

Agregar Comentario

Remove the two 3.67 mm screws from the top corners of the keyboard. Remove the two 3.67 mm screws from the top corners of the keyboard. Remove the two 3.67 mm screws from the top corners of the keyboard.
  • Remove the two 3.67 mm screws from the top corners of the keyboard.

Agregar Comentario

Use fingers to lift up the keyboard from the top.
  • Use fingers to lift up the keyboard from the top.

  • Do not try to remove the keyboard completely because it is still attached to the motherboard.

Agregar Comentario

Remove the cable connecting the keyboard with the motherboard. Be aware of the locking tabs on each side of the ribbon-cable connector—they slide back about 2mm to free the cable. Lift up and remove the keyboard.
  • Remove the cable connecting the keyboard with the motherboard.

  • Be aware of the locking tabs on each side of the ribbon-cable connector—they slide back about 2mm to free the cable.

  • Lift up and remove the keyboard.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Garrett Gudgel

Miembro Desde 05/10/10

714 Reputación

13 Guías creadas

Equipo

Cal Poly, Team 4-43, Amido Fall 2010 Miembro de Cal Poly, Team 4-43, Amido Fall 2010

CPSU-AMIDO-F10S4G43

5 Miembros

13 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 3

Todo El Tiempo: 3,954