Introducción

Guide to replace the battery in the Tom Tom XL.

Slip a small plastic opening tool underneath the screen bezel, gently sliding it around the inside edge.
  • Slip a small plastic opening tool underneath the screen bezel, gently sliding it around the inside edge.

  • Starting at the corners, carefully pry up the screen bezel.

Agregar Comentario

Remove the four Phillips #00 screws around the edge of the screen.
  • Remove the four Phillips #00 screws around the edge of the screen.

Agregar Comentario

Slide a small plastic opening tool under the top portion of the metal frame and gently lift it up. Slide the plastic opening tool around the inner edge of the metal frame until it feels loose. It may take some time to release the frame from the housing. Some force may be necessary—but be careful not to bend the frame's fragile interior bracket.
  • Slide a small plastic opening tool under the top portion of the metal frame and gently lift it up.

  • Slide the plastic opening tool around the inner edge of the metal frame until it feels loose.

    • It may take some time to release the frame from the housing. Some force may be necessary—but be careful not to bend the frame's fragile interior bracket.

  • Remove the frame from the housing.

Agregar Comentario

Lifting from the upper edge of the screen, tilt the screen away from the device. Tilt the screen slowly. Flipping the screen up too quickly may damage the display cable.
  • Lifting from the upper edge of the screen, tilt the screen away from the device.

  • Tilt the screen slowly. Flipping the screen up too quickly may damage the display cable.

Agregar Comentario

Remove the three Phillips #00 screws connecting the motherboard to the plastic housing: Two Phillips #00 screws are located at the bottom of the first picture.
  • Remove the three Phillips #00 screws connecting the motherboard to the plastic housing:

    • Two Phillips #00 screws are located at the bottom of the first picture.

    • The third screw is hidden under the orange ribbon cable, near the screen.

      • You may have to carefully lift the screen in order to reach this screw.

Agregar Comentario

Flip the screen and motherboard over. Gripping the plastic casing, disconnect the battery cable connector from the motherboard.
  • Flip the screen and motherboard over.

  • Gripping the plastic casing, disconnect the battery cable connector from the motherboard.

  • Disconnect the speaker cable connector from the motherboard.

  • Remove the motherboard and screen from the housing.

Agregar Comentario

Slip a small plastic opening tool under the battery and slowly pry the battery up.
  • Slip a small plastic opening tool under the battery and slowly pry the battery up.

    • The battery is held on with strong adhesive, so it may require some force. Work slowly and carefully to avoid damaging the housing

  • Remove the battery from the housing.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

7 personas más completaron esta guía.

Sean Higginson

Miembro Desde 21/04/10

145 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 33-84, Johann Spring 2010 Miembro de Cal Poly, Team 33-84, Johann Spring 2010

CPSU-JOHANN-S10S33G84

4 Miembros

5 Guías creadas

Note: There are several variants of this. Some of them have 2 screws on the bottom under the stickers. You'll need to remove those first.

nathanrenniewaldock - Contestar

Awesome and very detailed guide. Thanks for this.

Phil Harris - Contestar

Great demo, for replacement tomtom batteries take a look at : TomTom batteries

based in the UK they are reliable and give a truly longer charge

Kermit45 - Contestar

This was a great help. Followed the instructions and it was that easy. Thanks

mark - Contestar

nathanrenniewaldock is right... I cracked my screen before finding the hidden screws on the bottom. what a silly company to use the same name for different models!

Laz - Contestar

I just cut the wires and soldered them together

Cheater - Contestar

Yep: I didn't have a clue that there were two tiny screws under the label on the bottom - Now I'm hoping that it will "snap" back together OK. Live and Learn whether you want to or not........ lol

Phil Stevenson - Contestar

Great demo. It was perfect for me

lafontainephilippe - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 6

Últimos 7 Días: 67

Últimos 30 Días: 316

Todo El Tiempo: 43,397