Saltar al contenido principal

TiVo Series 2 TCD540080 Cooling Fan Replacement

Qué necesitas

  1. TiVo Series 2 TCD540080 Cooling Fan Replacement, Removal of TiVo Series 2 TCD540080 Case: paso 1, imagen 1 de 1
    • Power down the TiVo and detach the power cable from the rear of the unit.

    • Wait 5 minutes for the unit to fully discharge before proceeding to the next step.

  2. TiVo Series 2 TCD540080 Cooling Fan Replacement: paso 2, imagen 1 de 1
    • Remove the five T10 screws from the rear of the case using the Torx screwdriver.

  3. TiVo Series 2 TCD540080 Cooling Fan Replacement: paso 3, imagen 1 de 2 TiVo Series 2 TCD540080 Cooling Fan Replacement: paso 3, imagen 2 de 2
    • Lift up and pull back the outer casing towards the rear of the unit.

  4. TiVo Series 2 TCD540080 Cooling Fan Replacement, Cooling Fan: paso 4, imagen 1 de 1
    • The fan is held in by four T15 screws on the rear of the device.

  5. TiVo Series 2 TCD540080 Cooling Fan Replacement: paso 5, imagen 1 de 2 TiVo Series 2 TCD540080 Cooling Fan Replacement: paso 5, imagen 2 de 2
    • Take the wound red and black wires coming from the fan and follow them back to the logic board.

    • Unplug the connector from the motherboard.

  6. TiVo Series 2 TCD540080 Cooling Fan Replacement: paso 6, imagen 1 de 2 TiVo Series 2 TCD540080 Cooling Fan Replacement: paso 6, imagen 2 de 2
    • Pull the fan towards the front and out of the TiVo unit.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 33-79, Johann Spring 2010 Miembro de Cal Poly, Team 33-79, Johann Spring 2010

CPSU-JOHANN-S10S33G79

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 5,237