Introducción

This guide describes how to replace the hard drive.

Partes

No se requieren partes.

Unscrew the five 0.31 inch T-9 screws on the back cover.
  • Unscrew the five 0.31 inch T-9 screws on the back cover.

Agregar Comentario

Slide the cover towards the back until it is no longer under the front cover.
  • Slide the cover towards the back until it is no longer under the front cover.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Lift the cover up and off the device.
  • Lift the cover up and off the device.

Agregar Comentario

Locate the hard drive.
  • Locate the hard drive.

Agregar Comentario

Remove the ribbon cable by applying firm pressure to the black tabs on the sides. Remove the power cable to the right of the ribbon cable.
  • Remove the ribbon cable by applying firm pressure to the black tabs on the sides.

  • Remove the power cable to the right of the ribbon cable.

Agregar Comentario

Unscrew the 0.31 inch T-9 screws from the hard drive and pull outwards to remove. Unscrew the 0.31 inch T-9 screws from the hard drive and pull outwards to remove. Unscrew the 0.31 inch T-9 screws from the hard drive and pull outwards to remove.
  • Unscrew the 0.31 inch T-9 screws from the hard drive and pull outwards to remove.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Talha

Miembro Desde 11/10/11

31 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 5-33, Amido Fall 2011 Miembro de Cal Poly, Team 5-33, Amido Fall 2011

CPSU-AMIDO-F11S5G33

4 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 8

Todo El Tiempo: 1,432