Saltar al contenido principal

Tapwave T2907US Zodiac 2 Battery Replacement

Qué necesitas

  1. Tapwave T2907US Zodiac 2 Battery Replacement, Back Cover: paso 1, imagen 1 de 1
    • Remove the four Torx T5 screws from the back panel.

  2. Tapwave T2907US Zodiac 2 Battery Replacement: paso 2, imagen 1 de 1
    • Wedge a spudger in between the front and back panel.

    • Apply leverage downwards to the spudger in order to remove the back panel.

  3. Tapwave T2907US Zodiac 2 Battery Replacement, Battery: paso 3, imagen 1 de 1
    • Slide the battery out from under the brown wire-tape.

    • Be careful of the wires still connected to the other end of the battery. Do not pull or damage may occur.

  4. Tapwave T2907US Zodiac 2 Battery Replacement: paso 4, imagen 1 de 1
    • Slowly pull the white plug from its receptor. Grasp its sides firmly with a pair of tweezers and gently wiggle from side to side.

Linea de Meta

2 personas más completaron esta guía.

Daniel Wiseman

Miembro Desde 01/20/12

133 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 10-33, Amido Winter 2012 Miembro de Cal Poly, Team 10-33, Amido Winter 2012

CPSU-AMIDO-W12S10G33

4 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 6

Todo El Tiempo: 1,221