Repara tus cosas Comunidad Tienda

Suzuki FA50 Moped Exhaust Pipe Replacement

Introducción

Use this guide to remove the exhaust pipe from your Suzuki FA50 moped.

Qué necesitas

  1. Suzuki FA50 Moped Exhaust Pipe Replacement, Exhaust Pipe: paso 1, imagen 1 de 1

    • Use a #2 Phillips screwdriver to remove the heat shield from the muffler.

    Traducir

  3. Suzuki FA50 Moped Exhaust Pipe Replacement: paso 2, imagen 1 de 1

    • There are two 10 mm hex nuts attaching the muffler to the engine. Make sure you remove both of them before proceeding to the next step.

    • Use a 10 mm socket wrench to unscrew the two hex nuts.

    Traducir

  4. Suzuki FA50 Moped Exhaust Pipe Replacement: paso 3, imagen 1 de 1

    • Use a 12 mm socket wrench to unscrew the third and final hex nut that holds the muffler in place.

    • Make sure to support the muffler with your hand while removing this nut, otherwise it may just fall to the floor.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Un comentario

Thanks you very much! Happy Fourth of July.

D4Tay - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 9

Todo El Tiempo: 6,780