Introducción

If the device is on but nothing shows up on the screen, the screen may need to be replaced.

Partes

No se requieren partes.

Use your hand to remove the small back cover. Use your hand to remove the small back cover.
  • Use your hand to remove the small back cover.

Agregar Comentario

Remove the two 0.473" pan head screws as shown circled in the picture
  • Remove the two 0.473" pan head screws as shown circled in the picture

Agregar Comentario

The screen should now detach from the main device.
  • The screen should now detach from the main device.

  • The screen will still be connected by the wires

Agregar Comentario

Remove the wires attached to the white base by using the tweezers Remove the wires attached to the white base by using the tweezers
  • Remove the wires attached to the white base by using the tweezers

Agregar Comentario

Do the same with the wires attached to the black base. Do the same with the wires attached to the black base.
  • Do the same with the wires attached to the black base.

Agregar Comentario

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
The screen should now be completely separated from the main device.
  • The screen should now be completely separated from the main device.

Agregar Comentario

Remove the rubber feet and the screws underneath.
  • Remove the rubber feet and the screws underneath.

  • Remove the two exposed screws.

  • Pull back cables to expose the screw and then remove it.

Agregar Comentario

Using the spudger, separate the top and bottom covers.
  • Using the spudger, separate the top and bottom covers.

Agregar Comentario

Identify the gray back of the screen.
  • Identify the gray back of the screen.

Agregar Comentario

Remove the screws.
  • Remove the screws.

Agregar Comentario

Remove the metal plates.
  • Remove the metal plates.

Agregar Comentario

Using spudger, push the lock clips to unlock the ribbon cable. Using tweezers, pull the connector loose.
  • Using spudger, push the lock clips to unlock the ribbon cable.

  • Using tweezers, pull the connector loose.

Agregar Comentario

Place your hand on the front of the screen and push upwards. Place your hand on the front of the screen and push upwards.
  • Place your hand on the front of the screen and push upwards.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Equipo

Cal Poly, Team 11-21, Maness Winter 2012 Miembro de Cal Poly, Team 11-21, Maness Winter 2012

CPSU-MANESS-W12S11G21

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 2

Últimos 30 Días: 9

Todo El Tiempo: 2,163