Introducción

This guide will allow the user to access the motherboard for installation, replacement, or removal.

The battery cover is located on the right side of the camera.
  • The battery cover is located on the right side of the camera.

  • Slide the cover to expose the battery.

Agregar Comentario

Ensure that the battery lines up properly with the slot in the camera.
  • Ensure that the battery lines up properly with the slot in the camera.

  • Slide battery in.

  • Slide cover closed.

  • Battery not shown

Agregar Comentario

Remove screws from outside of camera. There are 6 screws total. 3 screws on underside. 1 screw on right side, near battery cover.
  • Remove screws from outside of camera. There are 6 screws total.

  • 3 screws on underside.

  • 1 screw on right side, near battery cover.

  • 2 screws on left side.

Agregar Comentario

Use screwdriver to remove screws.
  • Use screwdriver to remove screws.

Agregar Comentario

Gently pull the front cover off of the main camera.
  • Gently pull the front cover off of the main camera.

  • All of the inner parts of the camera are attached to the back screen.

Agregar Comentario

The front cover is now removed from the camera and the internal hardware is now exposed.
  • The front cover is now removed from the camera and the internal hardware is now exposed.

Agregar Comentario

This is the camera without the front cover.
  • This is the camera without the front cover.

Agregar Comentario

Remove tripod piece located at the bottom of the camera. This piece should slide out with ease.
  • Remove tripod piece located at the bottom of the camera. This piece should slide out with ease.

Agregar Comentario

Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are. Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are. Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are.
  • Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are.

Agregar Comentario

Pull apart the inner hardware from the back case by prying on the left side. Pull apart the inner hardware from the back case by prying on the left side. Pull apart the inner hardware from the back case by prying on the left side.
  • Pull apart the inner hardware from the back case by prying on the left side.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Remove the back cover.
  • Remove the back cover.

Agregar Comentario

The back cover is now removed from the internal hardware.
  • The back cover is now removed from the internal hardware.

Agregar Comentario

Use the spudger to pry the LCD from the camera.
  • Use the spudger to pry the LCD from the camera.

Agregar Comentario

The LCD is now removed from the camera, although attached by a ribbon at the bottom of the camera.
  • The LCD is now removed from the camera, although attached by a ribbon at the bottom of the camera.

Agregar Comentario

Flip camera to other side. Use tweezers to peel off black sticker, located in middle of the motherboard.
  • Flip camera to other side.

  • Use tweezers to peel off black sticker, located in middle of the motherboard.

Agregar Comentario

Use pry stick to pop out LCD connector ribbon, also called the ZIF connector. Use pry stick to pop out LCD connector ribbon, also called the ZIF connector.
  • Use pry stick to pop out LCD connector ribbon, also called the ZIF connector.

Agregar Comentario

The LCD is now removed from the camera.
  • The LCD is now removed from the camera.

Agregar Comentario

This is the CCD module.
  • This is the CCD module.

Agregar Comentario

Use plastic opening tool pop open the two ribbons attaching to the CCD module.
  • Use plastic opening tool pop open the two ribbons attaching to the CCD module.

  • These are the two ribbons.

Agregar Comentario

Remove CCD module.
  • Remove CCD module.

    • You may have to tug on the ribbons to remove the CCD module.

Agregar Comentario

The CCD module is now removed from the camera.
  • The CCD module is now removed from the camera.

Agregar Comentario

These two screws hold in the AV port. Use Phillips screwdriver to remove screws.
  • These two screws hold in the AV port.

  • Use Phillips screwdriver to remove screws.

Agregar Comentario

Remove metal screw plate.
  • Remove metal screw plate.

Agregar Comentario

Use pry stick to pop off ribbon.
  • Use pry stick to pop off ribbon.

Agregar Comentario

Remove AV port from camera.
  • Remove AV port from camera.

Agregar Comentario

The battery cover is located here. Pull away from camera to remove.
  • The battery cover is located here.

  • Pull away from camera to remove.

Agregar Comentario

Grip on the top and bottom. Pull up and out to remove motherboard and attached parts.
  • Grip on the top and bottom.

  • Pull up and out to remove motherboard and attached parts.

Agregar Comentario

Flip motherboard parts to position shown. There are three ribbons still attached to the motherboard. Pull these three ribbons to remove remaining parts from motherboard.
  • Flip motherboard parts to position shown.

  • There are three ribbons still attached to the motherboard.

  • Pull these three ribbons to remove remaining parts from motherboard.

Agregar Comentario

The motherboard is now removed from the camera.
  • The motherboard is now removed from the camera.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Stephannie Allen

Miembro Desde 11/03/13

189 Reputación

10 Guías creadas

Equipo

Clemson, Team 13-1, Benson Spring 2013 Miembro de Clemson, Team 13-1, Benson Spring 2013

CLEM-BENSON-S13S13G1

4 Miembros

10 Guías creadas

Superb,thank you very much !!!

Vedrasco Victor Vasili - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 386