Introducción

This guide will teach the user how to disassemble and access the AV port for replacement or installation.

The battery cover is located on the right side of the camera.
  • The battery cover is located on the right side of the camera.

  • Slide the cover to expose the battery.

Agregar Comentario

Ensure that the battery lines up properly with the slot in the camera.
  • Ensure that the battery lines up properly with the slot in the camera.

  • Slide battery in.

  • Slide cover closed.

  • Battery not shown

Agregar Comentario

This is the camera without the front cover.
  • This is the camera without the front cover.

Agregar Comentario

Remove tripod piece located at the bottom of the camera. This piece should slide out with ease.
  • Remove tripod piece located at the bottom of the camera. This piece should slide out with ease.

Agregar Comentario

Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are. Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are. Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are.
  • Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are.

Agregar Comentario

Pull apart the inner hardware from the back case by prying on the left side. Pull apart the inner hardware from the back case by prying on the left side. Pull apart the inner hardware from the back case by prying on the left side.
  • Pull apart the inner hardware from the back case by prying on the left side.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Remove the back cover.
  • Remove the back cover.

Agregar Comentario

The back cover is now removed from the internal hardware.
  • The back cover is now removed from the internal hardware.

Agregar Comentario

This is the CCD module.
  • This is the CCD module.

Agregar Comentario

Use plastic opening tool pop open the two ribbons attaching to the CCD module.
  • Use plastic opening tool pop open the two ribbons attaching to the CCD module.

  • These are the two ribbons.

Agregar Comentario

Remove CCD module.
  • Remove CCD module.

    • You may have to tug on the ribbons to remove the CCD module.

Agregar Comentario

The CCD module is now removed from the camera.
  • The CCD module is now removed from the camera.

Agregar Comentario

These two screws hold in the AV port. Use Phillips screwdriver to remove screws.
  • These two screws hold in the AV port.

  • Use Phillips screwdriver to remove screws.

Agregar Comentario

Remove metal screw plate.
  • Remove metal screw plate.

Agregar Comentario

Use pry stick to pop off ribbon.
  • Use pry stick to pop off ribbon.

Agregar Comentario

Remove AV port from camera.
  • Remove AV port from camera.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Stephannie Allen

Miembro Desde 11/03/13

189 Reputación

10 Guías creadas

Equipo

Clemson, Team 13-1, Benson Spring 2013 Miembro de Clemson, Team 13-1, Benson Spring 2013

CLEM-BENSON-S13S13G1

4 Miembros

10 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 4

Todo El Tiempo: 353