Repara tus cosas Comunidad Tienda

Sony Cyber-shot DSC-T1 Flash Replacement

Introducción

The flash bulb is the component of the camera responsible for illuminating the surroundings of the images. Replacing the flash bulb will require the removal of battery and black plastic housing that holds the CCD chip.

Qué necesitas

  1. Sony Cyber-shot DSC-T1 Flash Replacement, Battery: paso 1, imagen 1 de 1

    • Locate the cover on the bottom of the camera.

    • Slide the cover towards the back of the camera.

    • Be careful—the battery can slide out on its own.

    Traducir

  2. Sony Cyber-shot DSC-T1 Flash Replacement: paso 2, imagen 1 de 1

    • Carefully remove the exposed battery.

    • If it is difficult to remove, flip over the camera and the battery will slide out.

    Traducir

  3. Sony Cyber-shot DSC-T1 Flash Replacement, Flash: paso 3, imagen 1 de 3 Sony Cyber-shot DSC-T1 Flash Replacement, Flash: paso 3, imagen 2 de 3 Sony Cyber-shot DSC-T1 Flash Replacement, Flash: paso 3, imagen 3 de 3

    • Locate and remove the 3mm screws on the top and sides of the camera with the size 00 screwdriver.

    Traducir

  5. Sony Cyber-shot DSC-T1 Flash Replacement: paso 4, imagen 1 de 1

    • Pull the two halves of the camera apart.

    • Place the two halves down with the insides facing you.

    Traducir

  6. Sony Cyber-shot DSC-T1 Flash Replacement: paso 5, imagen 1 de 1

    • Find the two clips holding the motherboard to the black lens box.

    • Slide the plastic opening tool in between the ribbon and the black part of the clip, then flip it. (If difficult, your fingernail can also be used)

    Traducir

  7. Sony Cyber-shot DSC-T1 Flash Replacement: paso 6, imagen 1 de 1

    • After releasing the clips, pull out black lens box.

    Traducir

  8. Sony Cyber-shot DSC-T1 Flash Replacement: paso 7, imagen 1 de 2 Sony Cyber-shot DSC-T1 Flash Replacement: paso 7, imagen 2 de 2

    • Use the plastic opening tool to flip the clip.

    Traducir

  9. Sony Cyber-shot DSC-T1 Flash Replacement: paso 8, imagen 1 de 2 Sony Cyber-shot DSC-T1 Flash Replacement: paso 8, imagen 2 de 2

    • Grab the white part and slide it to the right until it clicks.

    • This may require some force.

    • Pull out the flash.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 6 otros colaboradores

Paul Elrich

Miembro Desde 04/12/12

33 Reputación

2 Guías creadas

Insignias: 6

+ 3 más insignias

Equipo

Cal Poly, Team 7-35, Maness Spring 2012 Miembro de Cal Poly, Team 7-35, Maness Spring 2012

CPSU-MANESS-S12S7G35

4 Miembros

3 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 722