Repara tus cosas Comunidad Tienda

Sony Cyber-shot DSC-P9 Motherboard Replacement

Qué necesitas

  1. Sony Cyber-shot DSC-P9 Motherboard Replacement, Battery: paso 1, imagen 1 de 1

    • Slide the battery latch down the side of the camera with your hands.

    • The latch will automatically pop open.

    Traducir

  2. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 2, imagen 1 de 1

    • Unlatch the clip over the battery.

    • The battery will partially pop out.

    Traducir

  3. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 3, imagen 1 de 2 Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 3, imagen 2 de 2

    • Remove the battery from the camera.

    Traducir

  4. Sony Cyber-shot DSC-P9 Motherboard Replacement, Outer Casing: paso 4, imagen 1 de 2 Sony Cyber-shot DSC-P9 Motherboard Replacement, Outer Casing: paso 4, imagen 2 de 2

    • Remove the four 3.0mm Phillips #000 screws on the top of the camera with the phillips screwdriver.

    • Remove the additional four 3.0mm Phillips #000 screws on the bottom of the camera.

    Traducir

  5. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 5, imagen 1 de 2 Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 5, imagen 2 de 2

    • Once the screws are removed, slowly remove the back casing from the rest of the camera.

    Traducir

  6. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 6, imagen 1 de 2 Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 6, imagen 2 de 2

    • Then, pull the front case away from the rest of the camera.

    Traducir

  7. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 7, imagen 1 de 1

    • After the casing is removed, the camera should look as shown.

    Traducir

  8. Sony Cyber-shot DSC-P9 Motherboard Replacement, Lens: paso 8, imagen 1 de 2 Sony Cyber-shot DSC-P9 Motherboard Replacement, Lens: paso 8, imagen 2 de 2

    • Dislodge the round casing from the lens.

    • Pull it away from the rest of the camera.

    Traducir

  10. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 9, imagen 1 de 1

    • Unscrew the two 4.0mm Phillips #000 screws from the display.

    Traducir

  11. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 10, imagen 1 de 1

    • Pull the two ribbon cables out of their slots on the back circuit board.

    Traducir

  12. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 11, imagen 1 de 1

    • Remove the three 4.0mm Phillips #000 screws holding the back panel in place.

    Traducir

  13. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 12, imagen 1 de 3 Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 12, imagen 2 de 3 Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 12, imagen 3 de 3

    • Work the back panel out from under the small grey clip.

    • Slide the back panel off of the camera by dislodging it from the remaining clips.

    • Below is a flat, orange cable connecting the lens to the motherboard.

    • Be careful not to bend the back plate during this process.

    Traducir

  14. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 13, imagen 1 de 1

    • Turn the camera over so that you can see the front of the lens.

    • Two connectors link the lens to the motherboard.

    • Gently bring the lens away from the camera.

    Traducir

  15. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 14, imagen 1 de 1

    • Using the flat end of the plastic spudger tool, flip up the black tabs on the connectors.

    • Be careful not to exert too much force, as the connectors are delicate.

    Traducir

  16. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 15, imagen 1 de 3 Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 15, imagen 2 de 3 Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 15, imagen 3 de 3

    • Gently pull out the cables and move the lens away from the rest of the camera.

    • You should now have two distinct, separate components.

    Traducir

  17. Sony Cyber-shot DSC-P9 Motherboard Replacement, Motherboard: paso 16, imagen 1 de 2 Sony Cyber-shot DSC-P9 Motherboard Replacement, Motherboard: paso 16, imagen 2 de 2

    • Rotate the bottom panel upwards and pull away with your hand.

    Traducir

  18. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 17, imagen 1 de 1

    • Remove the one 2.5mm Phillips #000 screw on the bottom corner of the motherboard.

    Traducir

  19. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 18, imagen 1 de 1

    • Lift the black tab holding the top-left ribbon cable in place with the spudger tool.

    • Remove the ribbon cable with the spudger by carefully pulling the cable directly out of the slot.

    • Take care not to rip the ribbon cable when pulling it out.

    Traducir

  20. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 19, imagen 1 de 1

    • Lift the black tab that locks the orange ribbon cable in place.

    • Remove the ribbon cable by gently pulling it out of the slot with the spudger.

    • Take care not to rip the ribbon cable when pulling it out, and be mindful of a second cable beneath the first.

    Traducir

  21. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 20, imagen 1 de 2 Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 20, imagen 2 de 2

    • Remove the second ribbon cable below the first one by gently pulling it out of the slot with the spudger.

    • Take care not to rip the ribbon cable when pulling it out.

    Traducir

  22. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 21, imagen 1 de 2 Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 21, imagen 2 de 2

    • Remove the ribbon cable to the right of the bottom two ribbon cables with the spudger.

    • Take care not to rip the ribbon cable when pulling it out.

    Traducir

  23. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 22, imagen 1 de 2 Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 22, imagen 2 de 2

    • Pull the motherboard out of the slot on the side of the camera where the lens used to be attached.

    Traducir

  24. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 23, imagen 1 de 3 Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 23, imagen 2 de 3 Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 23, imagen 3 de 3

    • Lift the motherboard away from the camera.

    • Detach the final ribbon cable connecting the motherboard to the rest of the camera.

    • Take care not to rip the ribbon cable when pulling it out.

    Traducir

  25. Sony Cyber-shot DSC-P9 Motherboard Replacement: paso 24, imagen 1 de 1

    • The motherboard should now be fully disconnected from the rest of the camera.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 5 otros colaboradores

Robert Potter

Miembro Desde 04/10/12

41 Reputación

1 Guía escrita

Insignias: 9

+ 6 más insignias

Equipo

Cal Poly, Team 17-25, Amido Spring 2012 Miembro de Cal Poly, Team 17-25, Amido Spring 2012

CPSU-AMIDO-S12S17G25

4 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 8

Todo El Tiempo: 1,219