Partes

No se requieren partes.

Slide the battery latch down the side of the camera with your hands.
  • Slide the battery latch down the side of the camera with your hands.

  • The latch will automatically pop open.

Agregar Comentario

Unlatch the clip over the battery.
  • Unlatch the clip over the battery.

  • The battery will partially pop out.

Agregar Comentario

Remove the battery from the camera. Remove the battery from the camera.
  • Remove the battery from the camera.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Unscrew the four 3.0mm Phillips #000 screws holding the back case onto the camera; there are two screws on top and two on the bottom.
  • Unscrew the four 3.0mm Phillips #000 screws holding the back case onto the camera; there are two screws on top and two on the bottom.

Agregar Comentario

Pull the back case gently away from the rest of the camera. Pull the back case gently away from the rest of the camera.
  • Pull the back case gently away from the rest of the camera.

Agregar Comentario

Remove the two 3.0mm Phillips #000 screws holding the display to the metal backing.
  • Remove the two 3.0mm Phillips #000 screws holding the display to the metal backing.

Agregar Comentario

Unlatch the display by sliding it towards the circuit board. Unlatch the display by sliding it towards the circuit board.
  • Unlatch the display by sliding it towards the circuit board.

Agregar Comentario

Remove the two ribbon cables attached to the circuit board by gently pulling them out of their slots.
  • Remove the two ribbon cables attached to the circuit board by gently pulling them out of their slots.

  • Be careful not to rip the ribbon cables while disconnecting them.

Agregar Comentario

The LCD is now separated from the camera.
  • The LCD is now separated from the camera.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jenna Crawford

Miembro Desde 09/04/12

29 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 17-25, Amido Spring 2012 Miembro de Cal Poly, Team 17-25, Amido Spring 2012

CPSU-AMIDO-S12S17G25

4 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 727