Saltar al contenido principal

Sony Clie PEG-SL10 Battery Harness Replacement

Qué necesitas

  1. Sony Clie PEG-SL10 Battery Harness Replacement, Battery Harness: paso 1, imagen 1 de 1
    • Remove the six screws holding the outside case of the Sony Clie.

  2. Sony Clie PEG-SL10 Battery Harness Replacement: paso 2, imagen 1 de 1
    • Remove the six screws holding the outer case.

  3. Sony Clie PEG-SL10 Battery Harness Replacement: paso 3, imagen 1 de 1
    • Remove the two screws holding the battery harness in place.

  4. Sony Clie PEG-SL10 Battery Harness Replacement: paso 4, imagen 1 de 1
    • Gently pull the power cable from the socket.

  5. Sony Clie PEG-SL10 Battery Harness Replacement: paso 5, imagen 1 de 1
    • The battery harness is now removed. Install the new harness in reverse order.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Emily

Miembro Desde 10/18/11

3 Reputación

3 Guías creadas

Equipo

James Madison, Team 1-4, Allen Fall 2011 Miembro de James Madison, Team 1-4, Allen Fall 2011

JMU-ALLEN-F11S1G4

3 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 1,270