Repara tus cosas Comunidad Tienda

Sharp Aquos LC13B2UA Front Case Replacement

Introducción

Outline what you are going to teach someone how to do.

Qué necesitas

  1. Sharp Aquos LC13B2UA Front Case Replacement, Stand: paso 1, imagen 1 de 2 Sharp Aquos LC13B2UA Front Case Replacement, Stand: paso 1, imagen 2 de 2

    • Place the TV face down on a flat smooth surface as to not scratch the screen.

    • Using a Phillips #2 screwdriver remove the four 8mm screws attaching the stand to the TV.

    Traducir

  2. Sharp Aquos LC13B2UA Front Case Replacement: paso 2, imagen 1 de 2 Sharp Aquos LC13B2UA Front Case Replacement: paso 2, imagen 2 de 2

    • Lift the stand off the television.

    Traducir

  3. Sharp Aquos LC13B2UA Front Case Replacement, Back Case: paso 3, imagen 1 de 3 Sharp Aquos LC13B2UA Front Case Replacement, Back Case: paso 3, imagen 2 de 3 Sharp Aquos LC13B2UA Front Case Replacement, Back Case: paso 3, imagen 3 de 3

    • Remove the two back panels by prying them out with your hands.

    Traducir

  4. Sharp Aquos LC13B2UA Front Case Replacement: paso 4, imagen 1 de 2 Sharp Aquos LC13B2UA Front Case Replacement: paso 4, imagen 2 de 2

    • Using a Phillips #2 screwdriver, remove the eight 6mm Phillips screws located around the edge.

    • Using a Phillips #2 screwdriver, remove the two 6mm Phillips screws located near the inputs.

    Traducir

  5. Sharp Aquos LC13B2UA Front Case Replacement: paso 5, imagen 1 de 1

    • Using your hands, gently lift and remove the back case of the television.

    Traducir

  7. Sharp Aquos LC13B2UA Front Case Replacement, Motherboard: paso 6, imagen 1 de 3 Sharp Aquos LC13B2UA Front Case Replacement, Motherboard: paso 6, imagen 2 de 3 Sharp Aquos LC13B2UA Front Case Replacement, Motherboard: paso 6, imagen 3 de 3

    • Remove the two speaker cables and the connector from the circuit board by pinching the plastic connectors and firmly pulling up.

    • Pull on the plastic part of the connector, even though it may seem easiest to pull on the wires.

    Traducir

  8. Sharp Aquos LC13B2UA Front Case Replacement: paso 7, imagen 1 de 2 Sharp Aquos LC13B2UA Front Case Replacement: paso 7, imagen 2 de 2

    • Remove the green and gray power connector from the side of the buttons panel at the top of the television.

    • Remove the green/gray to orange/gray connector from the center of the circuit board.

    Traducir

  9. Sharp Aquos LC13B2UA Front Case Replacement: paso 8, imagen 1 de 2 Sharp Aquos LC13B2UA Front Case Replacement: paso 8, imagen 2 de 2

    • Remove the four 5mm phillips screws attaching the LCD and circuit board to the front case.

    Traducir

  10. Sharp Aquos LC13B2UA Front Case Replacement: paso 9, imagen 1 de 1

    • Lift the circuit board/LCD block from the case by lifting the near side of the circuit board and sliding it under the button frame.

    Traducir

  11. Sharp Aquos LC13B2UA Front Case Replacement, Power Button: paso 10, imagen 1 de 3 Sharp Aquos LC13B2UA Front Case Replacement, Power Button: paso 10, imagen 2 de 3 Sharp Aquos LC13B2UA Front Case Replacement, Power Button: paso 10, imagen 3 de 3

    • Remove the two 6mm Phillips screws.

    • Pull the board toward you, giving you access to the power button.

    Traducir

  12. Sharp Aquos LC13B2UA Front Case Replacement, Top Buttons: paso 11, imagen 1 de 2 Sharp Aquos LC13B2UA Front Case Replacement, Top Buttons: paso 11, imagen 2 de 2

    • Unscrew the two 4mm Phillips screws.

    • Lift the buttons off the front case.

    Traducir

  13. Sharp Aquos LC13B2UA Front Case Replacement, Front Case: paso 12, imagen 1 de 2 Sharp Aquos LC13B2UA Front Case Replacement, Front Case: paso 12, imagen 2 de 2

    • Remove the eight 10mm screws connecting the two speakers to the front case.

    Traducir

  14. Sharp Aquos LC13B2UA Front Case Replacement: paso 13, imagen 1 de 3 Sharp Aquos LC13B2UA Front Case Replacement: paso 13, imagen 2 de 3 Sharp Aquos LC13B2UA Front Case Replacement: paso 13, imagen 3 de 3

    • Remove the two black tape strips securing the audio cables to the case.

    • Lift the audio cable from the plastic prongs securing it to the front case

    • The speakers can now be removed.

    Traducir

  15. Sharp Aquos LC13B2UA Front Case Replacement: paso 14, imagen 1 de 3 Sharp Aquos LC13B2UA Front Case Replacement: paso 14, imagen 2 de 3 Sharp Aquos LC13B2UA Front Case Replacement: paso 14, imagen 3 de 3

    • To remove the LED circuit at the base of the front casing, unscrew the two 5mm Phillips screws.

    • Lift the circuit to remove the plastic LED casing.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 4 otros colaboradores

Robert Hobson

Miembro Desde 01/20/11

1,290 Reputación

9 Guías creadas

Insignias: 12

+ 9 más insignias

Equipo

Cal Poly, Team 1-11, Amido Winter 2011 Miembro de Cal Poly, Team 1-11, Amido Winter 2011

CPSU-AMIDO-W11S1G11

4 Miembros

9 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 2,778