Introducción

This repair guide will take you through all the steps for removing the outer case of the Sega Genesis.

Partes

No se requieren partes.

Remove the six screws from the underside of the console with a Phillips #1 screwdriver.
  • Remove the six screws from the underside of the console with a Phillips #1 screwdriver.

Agregar Comentario

Flip the Sega Genesis upright.
  • Flip the Sega Genesis upright.

Agregar Comentario

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Gently lift the top casing.
  • Gently lift the top casing.

  • Note: the case will be connected to the main board by LED wires.

Agregar Comentario

Bend out the LED leads into vertical positions.
  • Bend out the LED leads into vertical positions.

Agregar Comentario

Slide the LED wire apparatus off the lead pins.
  • Slide the LED wire apparatus off the lead pins.

  • Note: observe which color wire corresponds with which length of pin.

Agregar Comentario

Separate the main board from the outer case.
  • Separate the main board from the outer case.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

11 personas más completaron esta guía.

Equipo

Cal Poly, Team 3-29, Regan Fall 2010 Miembro de Cal Poly, Team 3-29, Regan Fall 2010

CPSU-REGAN-F10S3G29

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 3

Últimos 7 Días: 37

Últimos 30 Días: 130

Todo El Tiempo: 13,426