Introducción

The purpose of this replacement guide is to remove the Sega plastic casing to expose the internal content for further repair.

Partes

No se requieren partes.

Using a Phillips head screwdriver remove  six screws from the bottom of the console. The six screws are marked.
  • Using a Phillips head screwdriver remove six screws from the bottom of the console.

    • The six screws are marked.

Agregar Comentario

Remove the two screws that attach the Genesis' connector to the rest of the console.
  • Remove the two screws that attach the Genesis' connector to the rest of the console.

    • The two screws are marked in the diagram.

Agregar Comentario

Slide the lock tab to the left to separate the halves of the console.
  • Slide the lock tab to the left to separate the halves of the console.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Lift from the left side to remove the top of the case.
  • Lift from the left side to remove the top of the case.

Agregar Comentario

Using the spudger, pry the cover off of the Genesis attachment.
  • Using the spudger, pry the cover off of the Genesis attachment.

Agregar Comentario

Lift the top of the case to remove the cover.
  • Lift the top of the case to remove the cover.

Agregar Comentario

Remove the faceplate by pulling it up, then out.
  • Remove the faceplate by pulling it up, then out.

Agregar Comentario

Conclusión

To reassemble the device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Ryan Kotzebue

Miembro Desde 07/10/10

243 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 5-14, Maness Fall 2010 Miembro de Cal Poly, Team 5-14, Maness Fall 2010

CPSU-MANESS-F10S5G14

5 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 12

Todo El Tiempo: 4,017