Saltar al contenido principal

Samsung SPH-A500 Keypad Replacement

Qué necesitas

  1. Samsung SPH-A500 Keypad Replacement, Keypad: paso 1, imagen 1 de 1
    • Turn phone over

    • Push the gray tab above the battery forward to remove the battery.

  2. Samsung SPH-A500 Keypad Replacement: paso 2, imagen 1 de 1
    • Remove the battery from the phone, which will reveal four screws at the corners of the phone.

  3. Samsung SPH-A500 Keypad Replacement: paso 3, imagen 1 de 1
    • Remove all four screws using a small Philips screwdriver.

    • Note: The screws do not need to be completely removed from the case, as long as they are unscrewed.

  4. Samsung SPH-A500 Keypad Replacement: paso 4, imagen 1 de 1
    • Remove back cover by carefully prying it open.

    • Note: Some force may be required.

  5. Samsung SPH-A500 Keypad Replacement: paso 5, imagen 1 de 1
    • Pull the side tabs outward while simultaneously lifting up the circuit board.

  6. Samsung SPH-A500 Keypad Replacement: paso 6, imagen 1 de 1
    • Lift circuit board from the bottom of the phone.

    • WARNING: DO NOT completely remove circuit board from the phone, since it is still attached at the top of the phone.

  7. Samsung SPH-A500 Keypad Replacement: paso 7, imagen 1 de 1
    • Flip the circuit board around the top of the phone.

    • Lift the rubber keypad off.

  8. Samsung SPH-A500 Keypad Replacement: paso 8, imagen 1 de 1
    • Replace the keypad.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Equipo

Cal Poly, Team 18-100, Johann Spring 2010 Miembro de Cal Poly, Team 18-100, Johann Spring 2010

CPSU-JOHANN-S10S18G100

4 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 1,797