Introducción

The camera may become broken over time. This guide will assist in the replacement of the camera.

Slide the latch on the back of the phone up.
  • Slide the latch on the back of the phone up.

Agregar Comentario

Remove the battery.
  • Remove the battery.

Agregar Comentario

After removing the battery, remove the four small Phillips-head screws with a #0 Phillips screwdriver.
  • After removing the battery, remove the four small Phillips-head screws with a #0 Phillips screwdriver.

Agregar Comentario

Using a thumbtack, pry the small plastic cover from the case near the base of the antenna.
  • Using a thumbtack, pry the small plastic cover from the case near the base of the antenna.

Agregar Comentario

With a #0 Phillips screwdriver remove the screw which you just uncovered.
  • With a #0 Phillips screwdriver remove the screw which you just uncovered.

Agregar Comentario

Using the spudger, carefully pry the case apart starting near the charging port. Ease the case open. Then disconnect the small power connector near the top of the phone.
  • Using the spudger, carefully pry the case apart starting near the charging port. Ease the case open.

  • Then disconnect the small power connector near the top of the phone.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Gently pry up the ribbon-type connector with the spudger.
  • Gently pry up the ribbon-type connector with the spudger.

Agregar Comentario

Carefully pry the logic board from the case with the spudger.
  • Carefully pry the logic board from the case with the spudger.

Agregar Comentario

Once the logic board has been removed, peel the keypad up.
  • Once the logic board has been removed, peel the keypad up.

Agregar Comentario

When using a spudger the keypad housing comes off quite easily, although it may be necessary to guide the ribbon cable through the slot in the housing. When using a spudger the keypad housing comes off quite easily, although it may be necessary to guide the ribbon cable through the slot in the housing.
  • When using a spudger the keypad housing comes off quite easily, although it may be necessary to guide the ribbon cable through the slot in the housing.

Agregar Comentario

Remove screws with #0 Phillips screwdriver.
  • Remove screws with #0 Phillips screwdriver.

Agregar Comentario

Carefully pry apart the casing with the spudger tool.
  • Carefully pry apart the casing with the spudger tool.

Agregar Comentario

Use the spudger to carefully pry off the speaker.
  • Use the spudger to carefully pry off the speaker.

Agregar Comentario

Carefully pry off the ringer with the spudger.
  • Carefully pry off the ringer with the spudger.

Agregar Comentario

Carefully pry off the screen with the spudger.
  • Carefully pry off the screen with the spudger.

Agregar Comentario

Gently pry off the camera with the spudger.
  • Gently pry off the camera with the spudger.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Nathan Brink

Miembro Desde 11/04/10

1 Reputación

14 Guías creadas

Equipo

Cal Poly, Team 34-59, Forte Spring 2010 Miembro de Cal Poly, Team 34-59, Forte Spring 2010

CPSU-FORTE-S10S34G59

4 Miembros

14 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 11

Todo El Tiempo: 4,040