Introducción

Installing the front cover of the phone.

Partes

No se requieren partes.

Use a Philips #0 screwdriver to remove the two screws below the screen.
  • Use a Philips #0 screwdriver to remove the two screws below the screen.

Agregar Comentario

Using the spudger, separate the black speaker cover from the top part of the phone. Gently remove the black speaker cover completely. Remove the two screws, approximately 10 mm in length, behind the black speaker cover with the screwdriver.
  • Using the spudger, separate the black speaker cover from the top part of the phone.

  • Gently remove the black speaker cover completely.

  • Remove the two screws, approximately 10 mm in length, behind the black speaker cover with the screwdriver.

Agregar Comentario

Once the two screws are taken out, use the spudger to remove the front cover of the phone. Once the two screws are taken out, use the spudger to remove the front cover of the phone.
  • Once the two screws are taken out, use the spudger to remove the front cover of the phone.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ashley

Miembro Desde 22/10/12

19 Reputación

4 Guías creadas

Equipo

Clemson, Team 14-6, Benson Fall 2012 Miembro de Clemson, Team 14-6, Benson Fall 2012

CLEM-BENSON-F12S14G6

3 Miembros

12 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 207