Saltar al contenido principal

Samsung Rogue Keyboard Replacement

Qué necesitas

  1. Samsung Rogue Keyboard Replacement, Battery: paso 1, imagen 1 de 2 Samsung Rogue Keyboard Replacement, Battery: paso 1, imagen 2 de 2
    • Before disassembling your Samsung Rogue, make sure it is powered off.

    • With your thumbs, push down on the back cover of your phone and slide it away from the camera.

  2. Samsung Rogue Keyboard Replacement: paso 2, imagen 1 de 2 Samsung Rogue Keyboard Replacement: paso 2, imagen 2 de 2
    • You can now remove the battery by prying it up with your finger.

  3. Samsung Rogue Keyboard Replacement, Motherboard: paso 3, imagen 1 de 1
    • Use a plastic opening tool to carefully pry the back cover surrounding the camera up from the phone.

  4. Samsung Rogue Keyboard Replacement: paso 4, imagen 1 de 1
    • Remove the five 3.4mm Philips screws securing the backing of the phone.

  5. Samsung Rogue Keyboard Replacement: paso 5, imagen 1 de 3 Samsung Rogue Keyboard Replacement: paso 5, imagen 2 de 3 Samsung Rogue Keyboard Replacement: paso 5, imagen 3 de 3
    • Use a plastic opening tool to carefully pry off the back cover.

    • Make sure you are prying along the edge and not between the two halves of the phone that slide away from each other.

    • Be careful to not drop the volume changing piece, for it can easily slip out.

  6. Samsung Rogue Keyboard Replacement: paso 6, imagen 1 de 1
    • Remove the two 3.45 mm Philips screws below the white sticker.

  7. Samsung Rogue Keyboard Replacement: paso 7, imagen 1 de 2 Samsung Rogue Keyboard Replacement: paso 7, imagen 2 de 2
    • Carefully lift the motherboard up from the bottom edge.

    • The film of wires is still attached to the motherboard, so do not completely remove the motherboard just yet or you may damage it.

  8. Samsung Rogue Keyboard Replacement: paso 8, imagen 1 de 2 Samsung Rogue Keyboard Replacement: paso 8, imagen 2 de 2
    • Use a plastic opening tool to disconnect the film from the motherboard.

  9. Samsung Rogue Keyboard Replacement, Keyboard: paso 9, imagen 1 de 1
    • Remove the eight 1.7mm Philips screws above the keyboard.

  10. Samsung Rogue Keyboard Replacement: paso 10, imagen 1 de 1
    • Carefully remove keyboard holder from the slider mechanisms underneath.

  11. Samsung Rogue Keyboard Replacement: paso 11, imagen 1 de 2 Samsung Rogue Keyboard Replacement: paso 11, imagen 2 de 2
    • Turn keyboard holder over and allow the keyboard to simply fall out into your hand.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 7-32, Maness Spring 2012 Miembro de Cal Poly, Team 7-32, Maness Spring 2012

CPSU-MANESS-S12S7G32

4 Miembros

16 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 298