Saltar al contenido principal

Samsung Eternity Input Jack Replacement

Qué necesitas

    • Remove the back battery cover.

  1. Samsung Eternity Input Jack Replacement: paso 2, imagen 1 de 1
    • Using the Phillips #00 screwdriver, remove the phone's battery.

  2. Samsung Eternity Input Jack Replacement: paso 3, imagen 1 de 1
    • Remove six (4.28 x 1.25)mm screws using the Phillips #00 screwdriver

  3. Samsung Eternity Input Jack Replacement: paso 4, imagen 1 de 2 Samsung Eternity Input Jack Replacement: paso 4, imagen 2 de 2
    • Continuing to use the Phillips #00 screwdriver, gently pry the silver plastic back plate from the body of the phone.

  4. Samsung Eternity Input Jack Replacement, Input Jack: paso 5, imagen 1 de 1
    • Peel off the Identification sticker

  5. Samsung Eternity Input Jack Replacement: paso 6, imagen 1 de 1
    • Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.

  6. Samsung Eternity Input Jack Replacement: paso 7, imagen 1 de 1
    • Pop the speaker plug out of its socket.

  7. Samsung Eternity Input Jack Replacement: paso 8, imagen 1 de 1
    • Peel the button sensor off the top of the case.

  8. Samsung Eternity Input Jack Replacement: paso 9, imagen 1 de 1
    • Peel the Input jack assembly out of the case.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Sven

Miembro Desde 04/18/11

52 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 15-11, Regan Spring 2011 Miembro de Cal Poly, Team 15-11, Regan Spring 2011

CPSU-REGAN-S11S15G11

5 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 1,449