Introducción

You will need to find a clean area to work in and have the necessary tools. Follow this guide to gain access to your cellphone's digitizer and screen.

  • Remove the back battery cover.

Agregar Comentario

Remove the phone's battery.
  • Remove the phone's battery.

Agregar Comentario

Remove six (4.28 x 1.25)mm screws.
  • Remove six (4.28 x 1.25)mm screws.

Agregar Comentario

Use the spudger to gently pry the silver plastic back plate from the body of the phone. Use the spudger to gently pry the silver plastic back plate from the body of the phone.
  • Use the spudger to gently pry the silver plastic back plate from the body of the phone.

Agregar Comentario

It is very easy to rip motherboard cables and damage fragile motherboard clips. Be careful when you are removing every component.
  • It is very easy to rip motherboard cables and damage fragile motherboard clips. Be careful when you are removing every component.

  • Pull the antenna plug out of its socket.

Agregar Comentario

Pop the two black hinged-release levers toward their ribbons, then slide the ribbons out. Pop the two black hinged-release levers toward their ribbons, then slide the ribbons out. Pop the two black hinged-release levers toward their ribbons, then slide the ribbons out.
  • Pop the two black hinged-release levers toward their ribbons, then slide the ribbons out.

Agregar Comentario

Pop the red hinged-release lever away from its ribbon. Then pull it out.
  • Pop the red hinged-release lever away from its ribbon. Then pull it out.

Agregar Comentario

Peel the button sensor on the side of the motherboard off of the case.
  • Peel the button sensor on the side of the motherboard off of the case.

Agregar Comentario

Slightly pull up one side of the motherboard. Pull the button/microphone plug out of its socket. Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.
  • Slightly pull up one side of the motherboard.

  • Pull the button/microphone plug out of its socket.

  • Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.

Agregar Comentario

You have successfully removed the motherboard from the phone.
  • You have successfully removed the motherboard from the phone.

Agregar Comentario

Flip phone over so you are looking at the front screen of the phone. (The back is already taken off and parts removed)
  • Flip phone over so you are looking at the front screen of the phone. (The back is already taken off and parts removed)

Agregar Comentario

Use a small tool to pry the digitizer and screen (together) from the frame of the phone. This may take some time and careful work because it is glued down to the frame. Be careful when you pull the lower part of this piece away from the phone frame because there is a ribbon attached to the digitizer that you don't want to break. There is also a ribbon on the side of the screen to be aware of. Be careful when you pull the lower part of this piece away from the phone frame because there is a ribbon attached to the digitizer that you don't want to break. There is also a ribbon on the side of the screen to be aware of.
  • Use a small tool to pry the digitizer and screen (together) from the frame of the phone. This may take some time and careful work because it is glued down to the frame.

  • Be careful when you pull the lower part of this piece away from the phone frame because there is a ribbon attached to the digitizer that you don't want to break. There is also a ribbon on the side of the screen to be aware of.

Agregar Comentario

Next, carefully pull the digitizer away from the screen. At this point you can replace either the screen or the digitizer. Cleaning the screen with a glass cleaning cloth before reassembling will remove any smudges or fingerprints from disassembling the device.
  • Next, carefully pull the digitizer away from the screen.

  • At this point you can replace either the screen or the digitizer.

  • Cleaning the screen with a glass cleaning cloth before reassembling will remove any smudges or fingerprints from disassembling the device.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Heather Behrend

Miembro Desde 20/04/11

127 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 15-11, Regan Spring 2011 Miembro de Cal Poly, Team 15-11, Regan Spring 2011

CPSU-REGAN-S11S15G11

5 Miembros

14 Guías creadas

You did not mention how to glue the digitizer to LCD. That is a very important step.

cashyapan - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 6,533