Introducción

You will need to find a clean area to work in and have the necessary tools. Follow this guide to gain access to your cellphone's camera module.

  • Remove the back battery cover.

Agregar Comentario

Remove the phone's battery.
  • Remove the phone's battery.

Agregar Comentario

Remove six (4.28 x 1.25)mm screws.
  • Remove six (4.28 x 1.25)mm screws.

Agregar Comentario

Use the spudger to gently pry the silver plastic back plate from the body of the phone. Use the spudger to gently pry the silver plastic back plate from the body of the phone.
  • Use the spudger to gently pry the silver plastic back plate from the body of the phone.

Agregar Comentario

Peel off the Identification sticker.
  • Peel off the Identification sticker.

Agregar Comentario

Peel the button sensor on the side of the motherboard off of the case.
  • Peel the button sensor on the side of the motherboard off of the case.

Agregar Comentario

Pop the black hinged-release lever toward its ribbon, then slide the ribbon out.
  • Pop the black hinged-release lever toward its ribbon, then slide the ribbon out.

Agregar Comentario

Peel up the camera attachment.
  • Peel up the camera attachment.

Agregar Comentario

You will now be able to replace the Camera component with a new part.
  • You will now be able to replace the Camera component with a new part.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 15-11, Regan Spring 2011 Miembro de Cal Poly, Team 15-11, Regan Spring 2011

CPSU-REGAN-S11S15G11

5 Miembros

14 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 1

Últimos 30 Días: 1

Todo El Tiempo: 1,635