Partes

No se requieren partes.

Make sure the toaster is unplugged before starting. Burnt hair smells even worse than burnt toast! Turn the toaster upside down and remove the rubber stopper "feet" with your fingers.
  • Make sure the toaster is unplugged before starting. Burnt hair smells even worse than burnt toast!

  • Turn the toaster upside down and remove the rubber stopper "feet" with your fingers.

Agregar Comentario

Using a #2 phillips head screwdriver, remove the four 12mm screws that attach the shell to the rest of the toaster. Using a #2 phillips head screwdriver, remove the four 12mm screws that attach the shell to the rest of the toaster.
  • Using a #2 phillips head screwdriver, remove the four 12mm screws that attach the shell to the rest of the toaster.

Agregar Comentario

With the dial facing you, push the toaster base up and away until the base is just over the lip of the shell. This will disconnect the browning dial from the rest of the toaster. When reassembling the toaster, make sure that the back of the dial lines up with the slot both in position and orientation (the dial and slot are not perfect  circles - they have a notch). The only object holding the shell onto the  toaster now is the grey part of the lever.
  • With the dial facing you, push the toaster base up and away until the base is just over the lip of the shell. This will disconnect the browning dial from the rest of the toaster.

  • When reassembling the toaster, make sure that the back of the dial lines up with the slot both in position and orientation (the dial and slot are not perfect circles - they have a notch).

  • The only object holding the shell onto the toaster now is the grey part of the lever.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Reach under the shell and grab the back, white part of the lever.
  • Reach under the shell and grab the back, white part of the lever.

  • Grab the grey lever between your index finger and your middle finger and pull.

  • Pulling too hard will break the mechanism that holds the grey handle onto the white lever.

  • Remove the shell.

Agregar Comentario

Locate the black, diamond shaped spring behind the white lever bracket.
  • Locate the black, diamond shaped spring behind the white lever bracket.

Agregar Comentario

To remove the spring, use the tweezers to push the bottom edge of the spring out and around the metal bracket that keeps the springs in place.
  • To remove the spring, use the tweezers to push the bottom edge of the spring out and around the metal bracket that keeps the springs in place.

  • Repeat this for the other side.

Agregar Comentario

Pulling the bottom of the spring out, lift the left circle up over the metal bracket that extends out from the bread grabbers.
  • Pulling the bottom of the spring out, lift the left circle up over the metal bracket that extends out from the bread grabbers.

  • Bring the right circle out, down, and around the bracket the extends out from the shelf that the toast would sits on.

  • Remove the right circle.

Agregar Comentario

Make sure that all the angles are similar to the other metal spring.
  • Make sure that all the angles are similar to the other metal spring.

  • If not, then bend the broken spring to the angles of the correct spring.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Grant Haug

Miembro Desde 26/09/12

115 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 2-8, Propen Fall 2012 Miembro de Cal Poly, Team 2-8, Propen Fall 2012

CPSU-PROPEN-F12S2G8

5 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 15

Todo El Tiempo: 2,117