Introducción

This is an easy guide to replacing the rear buttons on the Sanyo VPC-X1200.

Remove the five case screws with a Phillips #00 Screwdriver. Five 3.5mm Phillips Screws Five 3.5mm Phillips Screws
  • Remove the five case screws with a Phillips #00 Screwdriver.

  • Five 3.5mm Phillips Screws

Agregar Comentario

Gently lift up the back cover and set aside.
  • Gently lift up the back cover and set aside.

Agregar Comentario

Use small plastic pry tool to gently remove rear button plate.
  • Use small plastic pry tool to gently remove rear button plate.

  • A heat gun may be used to soften the glue for easier removal.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 7-10, Maness Spring 2010 Miembro de Cal Poly, Team 7-10, Maness Spring 2010

CPSU-MANESS-S10S7G10

4 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 1,326