Introducción

How to remove the keyboard cover.

Remove the 7 mm Philip screws.
  • Remove the 7 mm Philip screws.

  • Remove the 10 mm Philip screws.

  • Remove the 14 mm Philip screw.

Agregar Comentario

Open the flap on the left hand side. Open the flap on the left hand side.
  • Open the flap on the left hand side.

Agregar Comentario

Insert the iPod opening tools between the right and left sides of the latch. Pry the right side  of the latch, and then pry the left side to detach the laptop's cover.
  • Insert the iPod opening tools between the right and left sides of the latch.

  • Pry the right side of the latch, and then pry the left side to detach the laptop's cover.

Agregar Comentario

Open the flap on the right side. Open the flap on the right side.
  • Open the flap on the right side.

Agregar Comentario

Insert the iPod opening tools towards the right side of the latch.
  • Insert the iPod opening tools towards the right side of the latch.

  • Gently pry the right side out to release the top cover.

Agregar Comentario

Lift the keyboard slowly. A cable connects the keyboard to the motherboard. If you are not careful, you will damage the cable.
  • Lift the keyboard slowly.

  • A cable connects the keyboard to the motherboard. If you are not careful, you will damage the cable.

Agregar Comentario

Use your fingers or a spudger to detach the connector.
  • Use your fingers or a spudger to detach the connector.

Agregar Comentario

Carefully lift and remove the keyboard. Carefully lift and remove the keyboard.
  • Carefully lift and remove the keyboard.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Derek Driscoll

Miembro Desde 15/04/10

110 Reputación

16 Guías creadas

Equipo

Cal Poly, Team 26-27, Regan Spring 2010 Miembro de Cal Poly, Team 26-27, Regan Spring 2010

CPSU-REGAN-S10S26G27

3 Miembros

18 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 1,453