Herramientas

Partes

Resumen del Video

A video about replacing Navigation in BMW E39 http://www.youtube.com/watch?v=rmcAAYLmL....

Replacing a faulty Navigation computer CD or DVD drive or Upgrading an older navigation CD drive to the BMW DVD Navigation Drive is a plug and play upgrade in all model years
  • Replacing a faulty Navigation computer CD or DVD drive or Upgrading an older navigation CD drive to the BMW DVD Navigation Drive is a plug and play upgrade in all model years

  • BMW MKIV DVD Navigation drives can be purchased from online retailers. Do a google search for "BMW MKIV Navigation Computer" for available options

Agregar Comentario

Different BMW models require a slightly different process to remove the navigation computer however all are generally the same.  The following photos show removing the navigation computer in a BMW E38 7 Series In the back of the car locate the navigation computer drive and insert 4 pieces of a cutup coat hanger or a "Radio Removal Tool" into the holes of the drive Once the tools are in the holes you can grasp the navigation drive faceplate and slide it out
  • Different BMW models require a slightly different process to remove the navigation computer however all are generally the same. The following photos show removing the navigation computer in a BMW E38 7 Series

  • In the back of the car locate the navigation computer drive and insert 4 pieces of a cutup coat hanger or a "Radio Removal Tool" into the holes of the drive

  • Once the tools are in the holes you can grasp the navigation drive faceplate and slide it out

  • Photo shows closeup of where the tools release the locking mechanism

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Remove the plastic trunk liner screws to gain access to the wiring behind the navigation computer Slide out navigation dive  and disconnect the blue and magenta plus Slide out navigation dive  and disconnect the blue and magenta plus
  • Remove the plastic trunk liner screws to gain access to the wiring behind the navigation computer

  • Slide out navigation dive and disconnect the blue and magenta plus

Agregar Comentario

If your BMW is a 2000 Model Year or older, you will need to disconnect the separate GPS receiver located to the left of the navigation drive in the E38 or behind the amplifier bracket in the BMW E39 Once disconnected, connect the antennna wire to the back of the new navigation drive and remove the old separate GPS module as it will no longer be required
  • If your BMW is a 2000 Model Year or older, you will need to disconnect the separate GPS receiver located to the left of the navigation drive in the E38 or behind the amplifier bracket in the BMW E39

  • Once disconnected, connect the antennna wire to the back of the new navigation drive and remove the old separate GPS module as it will no longer be required

Agregar Comentario

Connect the Navigation Drive and slide back in place.  Then leave car off and outside for 20 minutes in order for the unit to recalibrate to the current location
  • Connect the Navigation Drive and slide back in place. Then leave car off and outside for 20 minutes in order for the unit to recalibrate to the current location

  • For more information do a google search for "BMW MKIV Navigation Computer"

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Martin Bishop

Miembro Desde 26/01/12

3,845 Reputación

16 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 7

Últimos 7 Días: 40

Últimos 30 Días: 297

Todo El Tiempo: 18,374