Peligro
Potencialmente Peligroso
Una lesión puede resultar si este procedimiento no se sigue correctamente. Ten precaución y sigue todas las advertencias.
Peligro

Partes

No se requieren partes.

Disconnect the power supply cord from the outlet.
  • Disconnect the power supply cord from the outlet.

Agregar Comentario

Remove the eight screws holding the wood-patterned cover to the microwave frame. The first four screws are located on either side of the microwave front.
  • Remove the eight screws holding the wood-patterned cover to the microwave frame.

  • The first four screws are located on either side of the microwave front.

Agregar Comentario

Remove the additional four screws securing the wood-paneled case to the microwave frame. Remove the additional four screws securing the wood-paneled case to the microwave frame.
  • Remove the additional four screws securing the wood-paneled case to the microwave frame.

Agregar Comentario

Placing your hands on either side of the case, slide the case back gently until you feel it completely separate from the microwave frame. Lift the case upward slowly until the case is free of the microwave. Lift the case upward slowly until the case is free of the microwave.
  • Placing your hands on either side of the case, slide the case back gently until you feel it completely separate from the microwave frame.

  • Lift the case upward slowly until the case is free of the microwave.

Agregar Comentario

Locate the fan in the newly exposed interior. Try spinning the fan with your finger. If it spins freely, the fan is not jammed.
  • Locate the fan in the newly exposed interior.

  • Try spinning the fan with your finger. If it spins freely, the fan is not jammed.

  • If the fan does not spin freely, locate what is jamming the fan and remove it.

Agregar Comentario

If the fan is not jammed yet still does not work, check that there are no disconnected wires, especially to the fan.
  • If the fan is not jammed yet still does not work, check that there are no disconnected wires, especially to the fan.

  • In order to work properly, there should be two wires going in and out of the fan. If you are missing either of these wires, locate the loose wire/s and connect them.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Melanie

Miembro Desde 26/09/12

59 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 2-12, Propen Fall 2012 Miembro de Cal Poly, Team 2-12, Propen Fall 2012

CPSU-PROPEN-F12S2G12

3 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 1,062