Peligro
Potencialmente Peligroso
Una lesión puede resultar si este procedimiento no se sigue correctamente. Ten precaución y sigue todas las advertencias.
Peligro

Partes

No se requieren partes.

Disconnect the power supply cord from the outlet.
  • Disconnect the power supply cord from the outlet.

Agregar Comentario

Remove the eight screws holding the wood-patterned cover to the microwave frame. The first four screws are located on either side of the microwave front.
  • Remove the eight screws holding the wood-patterned cover to the microwave frame.

  • The first four screws are located on either side of the microwave front.

Agregar Comentario

Remove the additional four screws securing the wood-paneled case to the microwave frame. Remove the additional four screws securing the wood-paneled case to the microwave frame.
  • Remove the additional four screws securing the wood-paneled case to the microwave frame.

Agregar Comentario

Placing your hands on either side of the case, slide the case back gently until you feel it completely separate from the microwave frame. Lift the case upward slowly until the case is free of the microwave. Lift the case upward slowly until the case is free of the microwave.
  • Placing your hands on either side of the case, slide the case back gently until you feel it completely separate from the microwave frame.

  • Lift the case upward slowly until the case is free of the microwave.

Agregar Comentario

Observe the lever mechanism found just behind the door handle, inside the microwave. The plastic lever should be above the metal lever. If the metal lever is above the plastic lever, this is why the door will not open.
  • Observe the lever mechanism found just behind the door handle, inside the microwave.

  • The plastic lever should be above the metal lever. If the metal lever is above the plastic lever, this is why the door will not open.

  • In this picture, the metal part is ABOVE the white plastic part. The white part needs to be lifted to open the door so when the door lever is pressed, the metal part rises, and the plastic part stays in place.

Agregar Comentario

Lift up on the outside lever. Push up on the white plastic piece. Push metal bar down, snapping the white plastic piece above it.
  • Lift up on the outside lever.

  • Push up on the white plastic piece.

  • Push metal bar down, snapping the white plastic piece above it.

Agregar Comentario

This is how the fixed mechanism should look. Press the button and enjoy your newly fixed door!
  • This is how the fixed mechanism should look.

  • Press the button and enjoy your newly fixed door!

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Samuel

Miembro Desde 26/09/12

100 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 2-12, Propen Fall 2012 Miembro de Cal Poly, Team 2-12, Propen Fall 2012

CPSU-PROPEN-F12S2G12

3 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 4

Todo El Tiempo: 1,158