Introducción

Sometimes during printing the paper will become jammed inside the printer. There are three places in which paper can become jammed. The following guide shows you the three different ways of removing the jammed paper depending on where the jam occurs.

Herramientas

No se requieren herramientas.

Partes

No se requieren partes.

Press the front cover release button.
  • Press the front cover release button.

  • Keep the button pressed and pull the cover toward yourself.

Agregar Comentario

With the front cover in the downward position, the drum & toner unit will be visible. Grab the black-and-yellow handle on the unit. Lift unit up and pull it out of the printer. Grab the black-and-yellow handle on the unit. Lift unit up and pull it out of the printer.
  • With the front cover in the downward position, the drum & toner unit will be visible.

  • Grab the black-and-yellow handle on the unit. Lift unit up and pull it out of the printer.

Agregar Comentario

DO NOT TOUCH the electrodes on the right inner wall of the printer. Touching these electrodes can cause electrical damage to the printer. DO NOT TOUCH the electrodes on the right inner wall of the printer. Touching these electrodes can cause electrical damage to the printer.
  • DO NOT TOUCH the electrodes on the right inner wall of the printer. Touching these electrodes can cause electrical damage to the printer.

Agregar Comentario

If jammed, paper will be visible after removing the drum unit. To clear paper jam, reach into printer and grab a corner of the paper. Proceed to lift paper up and out of the printer. Jammed paper may require an excess amount of force to be removed from printer.
  • If jammed, paper will be visible after removing the drum unit. To clear paper jam, reach into printer and grab a corner of the paper.

  • Proceed to lift paper up and out of the printer.

  • Jammed paper may require an excess amount of force to be removed from printer.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Grab onto the lift located on the paper tray near the bottom on the front of the printer. Pull the paper tray completely out of the printer by pulling towards yourself.
  • Grab onto the lift located on the paper tray near the bottom on the front of the printer.

  • Pull the paper tray completely out of the printer by pulling towards yourself.

Agregar Comentario

If jammed paper is visible, grab onto the paper and remove by pulling up and towards yourself. Jammed paper may require a large amount of force to be removed from printer.
  • If jammed paper is visible, grab onto the paper and remove by pulling up and towards yourself.

  • Jammed paper may require a large amount of force to be removed from printer.

Agregar Comentario

Located on the back of the printer, open up the cover by grabbing onto the tab and pulling down. Located on the back of the printer, open up the cover by grabbing onto the tab and pulling down. Located on the back of the printer, open up the cover by grabbing onto the tab and pulling down.
  • Located on the back of the printer, open up the cover by grabbing onto the tab and pulling down.

Agregar Comentario

In front of you will see two blue tabs, one on the left and right side. First, push the top part of the tab in until the bottom part of the tab lifts up. Grab onto the bottom part of the tab.
  • In front of you will see two blue tabs, one on the left and right side.

  • First, push the top part of the tab in until the bottom part of the tab lifts up.

  • Grab onto the bottom part of the tab.

Agregar Comentario

Once you have a firm grib of both the right and left tab, lift both tabs up and towards yourself. The fuser cover, which the tabs are connected to, does not come completely out of the printer because it is attached to the bottom by a hinge.
  • Once you have a firm grib of both the right and left tab, lift both tabs up and towards yourself.

  • The fuser cover, which the tabs are connected to, does not come completely out of the printer because it is attached to the bottom by a hinge.

Agregar Comentario

If jammed paper is visible, grab onto the top of the paper and pull up until completely removed from printer. Jammed paper may require an excess amount of force to be removed from printer. Jammed paper may require an excess amount of force to be removed from printer.
  • If jammed paper is visible, grab onto the top of the paper and pull up until completely removed from printer.

  • Jammed paper may require an excess amount of force to be removed from printer.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Nathan Ruiz

Miembro Desde 14/01/10

159 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 4-14, Forte Winter 2010 Miembro de Cal Poly, Team 4-14, Forte Winter 2010

CPSU-FORTE-W10S4G14

5 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 6

Últimos 7 Días: 21

Últimos 30 Días: 103

Todo El Tiempo: 10,290