Introducción

Canon "E-18 error" happens when the lens gets stuck in the extended position. The LCD will display a little E-18 in the lower-left corner and start beeping.

Partes

No se requieren partes.

Place camera lens facing upwards on the table.
  • Place camera lens facing upwards on the table.

  • Press and hold down the power button.

  • Simultaneously press down the shutter button.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Replace the batteries in the camera.
  • Replace the batteries in the camera.

  • To open the battery cover slide the black lever on the underside of the camera and pull the cover toward the front.

  • Remove the old batteries from the camera and wait a few moments.

  • Put in a fresh set of batteries.

  • Close battery slide and power camera back on.

Agregar Comentario

Put camera in the "no heat" setting prior to using the blow dryer.
  • Put camera in the "no heat" setting prior to using the blow dryer.

  • Plug in and turn the blow dryer on.

  • Blow air in the gaps between the lens.

Agregar Comentario

Conclusión

In conclusion, using this guide to fix the E-18 on the lens of the Canon PowerShot A80,will allow the camera to capture photos once again. To reassemble your device, follow these instructions in reverse order.

Tim

Miembro Desde 06/01/11

127 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 7-31, Regan Winter 2011 Miembro de Cal Poly, Team 7-31, Regan Winter 2011

CPSU-REGAN-W11S7G31

6 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 5

Últimos 30 Días: 13

Todo El Tiempo: 3,505