Introducción

Removing and replacing the DVD-ROM drive.

Partes

No se requieren partes.

Pull on outer latch. Lower door until it is level with your work surface.
  • Pull on outer latch.

  • Lower door until it is level with your work surface.

  • Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.

Agregar Comentario

Removing the faceplate. On the inside of the case, find the two plastic tabs.
  • Removing the faceplate.

    • On the inside of the case, find the two plastic tabs.

    • While depressing the tabs, remove the faceplate by pulling and rotating outward.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Remove the two screws on the front of the drive with the Phillips #1 screwdriver.
  • Remove the two screws on the front of the drive with the Phillips #1 screwdriver.

Agregar Comentario

Pull the drive out to allow access to the power and ribbon cables. Do not fully remove. Remove both the power and ribbon cable. Remove both the power and ribbon cable.
  • Pull the drive out to allow access to the power and ribbon cables. Do not fully remove.

  • Remove both the power and ribbon cable.

Agregar Comentario

Linea de Meta

23 personas más completaron esta guía.

Justin Petrilli

Miembro Desde 21/01/10

2,598 Reputación

11 Guías creadas

Equipo

Cal Poly, Team 13-24, Maness Winter 2010 Miembro de Cal Poly, Team 13-24, Maness Winter 2010

CPSU-MANESS-W10S13G24

4 Miembros

13 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 23

Todo El Tiempo: 8,399