Saltar al contenido principal

Removing Philips DC320 37 Bottom Panel

Qué necesitas

  1. Removing Philips DC320 37 Bottom Panel, Docking entertainment system: paso 1, imagen 1 de 1
    • Pry off the four white feet with the pointed end of the spudger

  2. Removing Philips DC320 37 Bottom Panel: paso 2, imagen 1 de 1
    • Gently unscrew the four 15.5 mm Phillips #2 screws that hold the bottom panel to the dock.

  3. Removing Philips DC320 37 Bottom Panel: paso 3, imagen 1 de 1
    • Use the flat end of the spudger to pry the lid off from the two connectors holding it to the body of the dock.

    • The connectors on the panel are fragile and may break.

  4. Removing Philips DC320 37 Bottom Panel: paso 4, imagen 1 de 3 Removing Philips DC320 37 Bottom Panel: paso 4, imagen 2 de 3 Removing Philips DC320 37 Bottom Panel: paso 4, imagen 3 de 3
    • Carefully pull up and out the four electrical connectors and two ribbon connectors that connect the bottom panel to the dock.

    • Electrical Connectors

    • Ribbon Connectors

    • The cables do not have a lot of slack in them. Be careful not to break the connectors.

    • One wire is soldered onto the bottom panel. Be careful not to break this bond.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Greg Lane

Miembro Desde 04/16/13

39 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 3-48, Amido Spring 2013 Miembro de Cal Poly, Team 3-48, Amido Spring 2013

CPSU-AMIDO-S13S3G48

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 392