Saltar al contenido principal

Removing Front Panel/ Screen Logic Board

Qué necesitas

  1. Removing Front Panel/ Screen Logic Board, Front panel/ Screen Logic Board: paso 1, imagen 1 de 1
    • Using the plastic opening tool, pry off the top faceplate.

    • Place the tool in the small crack that runs along the side of the phone and pry.

  2. Removing Front Panel/ Screen Logic Board: paso 2, imagen 1 de 1
    • Using the T6 Torx Screwdriver remove all 4 small screws.

  3. Removing Front Panel/ Screen Logic Board: paso 3, imagen 1 de 1
    • Remove silver plate from phone.

  4. Removing Front Panel/ Screen Logic Board: paso 4, imagen 1 de 1
    • Using the spudger remove the plastic camera casing

  5. Removing Front Panel/ Screen Logic Board: paso 5, imagen 1 de 1
    • Using the iPod Opening Tool remove the yellow flex cable from the green logic board.

  6. Removing Front Panel/ Screen Logic Board: paso 6, imagen 1 de 1
    • Use Spudger or hands to detach flex cable from front screen logic board

Conclusión

To reassemble your device, follow these instructions in reverse order.

Cecilia

Miembro Desde 04/11/10

1 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 27-96, Amido Spring 2010 Miembro de Cal Poly, Team 27-96, Amido Spring 2010

CPSU-AMIDO-S10S27G96

4 Miembros

15 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 1,868