Introducción

The purpose of this guide is to demonstrate how to locate and remove the 1150 Wireless MiniPCI Card.

Partes

No se requieren partes.

Turn the laptop upside down and  locate the panel labeled C. Unscrew the single screw holding the cover in place. lift up the cover and remove it to exposed the Wireless MiniPCI Card.
  • Turn the laptop upside down and locate the panel labeled C.

  • Unscrew the single screw holding the cover in place.

  • lift up the cover and remove it to exposed the Wireless MiniPCI Card.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Using a plastic spudger or similar, gently pry the grey and black wires off. The grey and black wires are the antenna wires so be careful not to damage them
  • Using a plastic spudger or similar, gently pry the grey and black wires off.

  • The grey and black wires are the antenna wires so be careful not to damage them

  • Gently pull the retaining clips away from the board so that the board pops up.

Agregar Comentario

Lift the board up and out of the mini PCI slot at an angle of about 35 - 45 degrees
  • Lift the board up and out of the mini PCI slot at an angle of about 35 - 45 degrees

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Teja

Miembro Desde 27/04/10

98 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 16-2, Maness Spring 2010 Miembro de Cal Poly, Team 16-2, Maness Spring 2010

CPSU-MANESS-S10S16G2

4 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 5,450